Perhaps also reading User Guide 6.2. Wide Graph Settings should help: 'It is important to set appropriate lower and upper audio frequency limits for the Wide Graph because these limits define the FT8 decoder’s search window.'
73, Reino OH3mA > -----Original Message----- > From: Dwayne Sinclair via wsjt-devel [mailto:wsjt- > de...@lists.sourceforge.net] > Sent: 5. huhtikuutata 2023 19:59 > To: WSJT software development <wsjt-devel@lists.sourceforge.net> > Cc: Dwayne Sinclair <dwayne_sincl...@me.com> > Subject: Re: [wsjt-devel] Truncated Waterfall Display "Feature" > > Go ahead and test for yourself - Change bin/pixel to 1 displaying say only > the first 600Hz and see what your decodes look like. > > 73 Dwayne AB6A > > > On Apr 5, 2023, at 9:37 AM, k2txb--- via wsjt-devel <wsjt- > de...@lists.sourceforge.net> wrote: > > > > Dwane, I am almost certain that your assumption in incorrect. For WSJT > in general, it does not matter what the settings for the waterfall display > are set to. They have nothing to do with decoding, they provide only > visual signal recognition. So, if there is a decodable signal above the 1500 > Hz it will still decode. It is much more important to make sure his receiver > bandwidth is wide enough to pass the signal at that frequency. > > > > 73, Russ K2TXB > > > > -----Original Message----- > > From: Dwayne Sinclair via wsjt-devel <wsjt-devel@lists.sourceforge.net> > > Sent: Wednesday, April 5, 2023 11:35 AM > > To: WSJT software development <wsjt-devel@lists.sourceforge.net> > > Cc: Dwayne Sinclair <dwayne_sincl...@me.com> > > Subject: [wsjt-devel] Truncated Waterfall Display "Feature" > > > > Last night, I met an operator who was struggling with EME on 23CM after > abandoning EME on the 70CM band. As soon as he started up WSJT-X, I > noted his waterfall display was set to Bins/Pixel 2 instead of 5/6 and less > than 1500Hz was displayed on the screen. All decodes 1500Hz and up > were not decoded. I am pretty sure this was the cause of his issues on > 70CM together with his current issues on 23CM and the “lack of decodes” > as he complained. > > > > I have to ask - Can we fix this so that irrespective of what the Waterfall > window displays, decodes will still occur for the full 3KHz or whatever > value is specified in advanced options. > > > > 73 Dwayne AB6A > > > > _______________________________________________ > > wsjt-devel mailing list > > wsjt-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > > > > > > _______________________________________________ > > wsjt-devel mailing list > > wsjt-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel