Since installing 2.7.0-rc1 (built from source), I have observed the following behavior on Fedora Core 38, 64-bit, hamlib 4.5.4. Yaesu FT-950, tty/USB0 for serial, and Signalink USB sound card. PTT method is CAT. Everything worked normally in FC37 and wsjtx-2.6.1.
"Test CAT" does not turn green, but WSPR band-hopping works. Changing frequency at the radio results in changing frequency in the WSJT-X window. So there is serial communication.... "Test PTT" works. So there is serial communication...... "Enable TX" button is reset (unset) on each band hopping band change, whether or not "tune" is selected in the WSPR band-hopping schedule. "Enable TX" followed by "Tune" transmits as expected, but the second press of "Tune" to stop tuning turns off both "Tune" and "Enable Tx" buttons. Output of rigctl seems pretty normal with the same serial parameters. -- P.J. "Josh" Rovero http://www.roveroresearch.org Ham Radio: KK1D
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
