But it worked also when I set my Rx QRG manually 275 Hz next to the Fox offset.
Perhaps when the fox offset for your callsign changes?
I think I've seen that.
On Friday, January 26, 2024 at 09:15:37 AM CST, Uwe, DG2YCB via wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote:
Hi Rich,
Last night I ran some tests with our good old standard WSJT-X (latest code) using three instances all connected via virtual audio. One in FT8 Fox mode and the other two in FT8 Hound mode. Then I simulated just such QSO situations, but each time the reports appeared in the right-hand window of the two Hound stations. Not a single issue, even if I set the Rx frequency next to the Fox's audio signal. So, at the moment I can't reproduce this unwanted effect.
Please note that the "231031" code of 2.7.1-devel has received several updates in the meantime. Test it again with the current "240106" code, or with the soon-to-be released "240202" code. With the latter I will repeat the same test from last night.
73 de DG2YCB,
Uwe
________________________________________
German Amateur Radio Station DG2YCB
Dr. Uwe Risse
eMail: dg2...@gmx.de
Info: www.qrz.com/db/DG2YCB
Am 26.01.2024 um 15:18 schrieb Rich - K1HTV via wsjt-devel:
I have noticed the same thing at times while running as Hound in F/H where the report from the Fox will appear in the Band Activity column but not in the Rx Frequency column.I am presently running the "WSJT-X V2.7.1 devel 231031 Improved PLUS" version.
Also, when the "Start new period decodes at top" checkbox is checked, many times a day the background color will change from white to another background color. When this occurs it is not always the same color.
Also, at times when using the "Start new period decodes at top" option, the Band activity columns display will revert back to the earliest decodes, often many tens of minutes earlier.
73,
Rich - K1HTV
On Fri, Jan 26, 2024 at 7:55 AM <wsjt-devel-requ...@lists.sourceforge.net> wrote:
Send wsjt-devel mailing list submissions to
wsjt-devel@lists.sourceforge.net
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
or, via email, send a message with subject or body 'help' to
wsjt-devel-requ...@lists.sourceforge.net
You can reach the person managing the list at
wsjt-devel-ow...@lists.sourceforge.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of wsjt-devel digest..."
Today's Topics:
1. skips RX frequency window (bug?) wsjtx-2.7.0-rc3 (Glenn Williams)
---------- Forwarded message ----------
From: Glenn Williams <a...@alumni.caltech.edu>
To: wsjt-devel@lists.sourceforge.net
Cc:
Bcc:
Date: Thu, 25 Jan 2024 08:12:51 -0500
Subject: [wsjt-devel] skips RX frequency window (bug?) wsjtx-2.7.0-rc3
V 2.7.0-rc3
Last night worked FT8 F/H with TX5S 80m. Rig TS590SG, PC Win 10. (This
has happened once or twice before.) His S/N report on me popped up in
Band Act window after my TX1, but no report in RX Freq window. TX3
completed OK in both Windows. I use COLORS and so red was instantly
obvious. Antenna is 160m inv-L about 360 feet away. Power on the order
of 450 watts with tuner. Not thinking RFI because no other times ever I
see any.
-73, Glenn, AF8C
--------------
--
This email has been checked for viruses by Avast antivirus software.
www.avast.com
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
