I saw the same behavior over the past few days while working TX5S. I am running 2.7.0-rc3 (regular version) not the improved version.
My first thoughts were that it was due to the Rx green goalpost in the waterfall being over a different stream than the one sending the response. I have no means of testing this scenario. So at this point, it is only an observation. -Scott AA5AM On Fri, Jan 26, 2024, 10:12 AM Gary Rogers via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > I had the same thing happen as with Fred. > > Improved rc3 for Mac M1 > > Sent from my iPhone > > On Jan 26, 2024, at 11:00 AM, Fred Price via wsjt-devel < > wsjt-devel@lists.sourceforge.net> wrote: > > > Screenshot of it happening to me with TX5S. > <PNG image.png> > > > On Jan 26, 2024, at 10:51 AM, Uwe, DG2YCB via wsjt-devel < > wsjt-devel@lists.sourceforge.net> wrote: > > But it worked also when I set my Rx QRG manually 275 Hz next to the Fox > offset. > > 73 de DG2YCB, > Uwe > ________________________________________ > German Amateur Radio Station DG2YCB > Dr. Uwe Risse > eMail: dg2...@gmx.de > Info: www.qrz.com/db/DG2YCB > > > Am 26.01.2024 um 16:44 schrieb Black Michael: > > Perhaps when the fox offset for your callsign changes? > I think I've seen that. > > > > > > > > > > On Friday, January 26, 2024 at 09:15:37 AM CST, Uwe, DG2YCB via wsjt-devel > <wsjt-devel@lists.sourceforge.net> <wsjt-devel@lists.sourceforge.net> wrote: > > > > > > Hi Rich, > > Last night I ran some tests with our good old standard WSJT-X (latest code) > using three instances all connected via virtual audio. One in FT8 Fox mode > and the other two in FT8 Hound mode. Then I simulated just such QSO > situations, but each time the reports appeared in the right-hand window of > the two Hound stations. Not a single issue, even if I set the Rx frequency > next to the Fox's audio signal. So, at the moment I can't reproduce this > unwanted effect. > > Please note that the "231031" code of 2.7.1-devel has received several > updates in the meantime. Test it again with the current "240106" code, or > with the soon-to-be released "240202" code. With the latter I will repeat the > same test from last night. > > > 73 de DG2YCB, > Uwe > ________________________________________ > German Amateur Radio Station DG2YCB > Dr. Uwe Risse > eMail: dg2...@gmx.de > Info: www.qrz.com/db/DG2YCB > > > > > Am 26.01.2024 um 15:18 schrieb Rich - K1HTV via wsjt-devel: > > > > > > I have noticed the same thing at times while running as Hound in F/H where > the report from the Fox will appear in the Band Activity column but not in > the Rx Frequency column.I am presently running the "WSJT-X V2.7.1 devel > 231031 Improved PLUS" version. > > > > > Also, when the "Start new period decodes at top" checkbox is checked, many > times a day the background color will change from white to another background > color. When this occurs it is not always the same color. > > > > > Also, at times when using the "Start new period decodes at top" option, the > Band activity columns display will revert back to the earliest decodes, often > many tens of minutes earlier. > > > > > 73, > > Rich - K1HTV > > > > > > > > On Fri, Jan 26, 2024 at 7:55 AM <wsjt-devel-requ...@lists.sourceforge.net> > <wsjt-devel-requ...@lists.sourceforge.net> wrote: > > > > Send wsjt-devel mailing list submissions to > wsjt-devel@lists.sourceforge.net > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > or, via email, send a message with subject or body 'help' to > wsjt-devel-requ...@lists.sourceforge.net > > You can reach the person managing the list at > wsjt-devel-ow...@lists.sourceforge.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of wsjt-devel digest..." > Today's Topics: > > 1. skips RX frequency window (bug?) wsjtx-2.7.0-rc3 (Glenn Williams) > > > > ---------- Forwarded message ---------- > From: Glenn Williams <a...@alumni.caltech.edu> <a...@alumni.caltech.edu> > To: wsjt-devel@lists.sourceforge.net > Cc: > Bcc: > Date: Thu, 25 Jan 2024 08:12:51 -0500 > Subject: [wsjt-devel] skips RX frequency window (bug?) wsjtx-2.7.0-rc3 > V 2.7.0-rc3 > Last night worked FT8 F/H with TX5S 80m. Rig TS590SG, PC Win 10. (This > has happened once or twice before.) His S/N report on me popped up in > Band Act window after my TX1, but no report in RX Freq window. TX3 > completed OK in both Windows. I use COLORS and so red was instantly > obvious. Antenna is 160m inv-L about 360 feet away. Power on the order > of 450 watts with tuner. Not thinking RFI because no other times ever I > see any. > > -73, Glenn, AF8C > -------------- > > -- > This email has been checked for viruses by Avast antivirus > software.www.avast.com > > > _______________________________________________ > wsjt-devel mailing > listwsjt-devel@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > > > > > _______________________________________________ > wsjt-devel mailing > listwsjt-devel@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > _______________________________________________ > wsjt-devel mailing > listwsjt-devel@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
