Hi all, Short information: Although I could not reproduce this unwanted effect so far, I have now added another line of code as a test for my upcoming 'improved' 2.7.1-devel "240202" update, which has the effect that if you are in FT8 Hound mode, all messages (below 1000 Hz) are really displayed in the right window if they contain your own callsign.
This gives us double certainty that every report or whatever will be displayed there in the future. However, it also has the side effect that messages to A1BCD, for example, are also displayed there if your own callsign is A1BC. But since this is only effective in hound mode, this should be acceptable, because all messages on your Rx QRG are displayed there anyway. Then we can see whether this really solves the problem or not. Depending on this, we can decide whether we also include this additional line in our regular WSJT-X. The mentioned i+ update is planned to be rolled out on February 2. Those who are interested in testing will find it here <https://sourceforge.net/projects/wsjt-x-improved/files/WSJT-X_v2.7.1/>. As always, I am announcing anything about my so-called 'improved' versions via the wsjt-x-improved-community email reflector <https://sourceforge.net/projects/wsjt-x-improved/lists/wsjt-x-improved-community>, as this list here is primarily intended for our regular versions of WSJT-X. By the way, with the "240202" update I also plan to deactivate this strange function that pressing the RETURN or ENTER keys switches your transmitter on when you are in FT8 Hound mode, because this confuses many OMs and makes little sense, at least from my point of view. Tell me if there is any good reason why this was/is necessary. 73 de DG2YCB, Uwe ________________________________________ German Amateur Radio Station DG2YCB Dr. Uwe Risse eMail: dg2...@gmx.de Info: www.qrz.com/db/DG2YCB Am 26.01.2024 um 23:06 schrieb Andy Durbin via wsjt-devel:
"I have noticed the same thing at times while running as Hound in F/H where the report from the Fox will appear in the Band Activity column but not in the Rx Frequency column. I am presently running the "WSJT-X V2.7.1 devel 231031 Improved PLUS" version." I think I have seen this once with ver 2.6.1. F/H QSO completed ok. I think it's rare but not new in the versions later than 2.6.1. It's a don't care for me as I'd prefer the RX frequency to only include decodes at the RX frequency as designated by the RX frequency cursor. Only commenting because I don't think it's a new bug. Andy, k3wyc _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
