Should be able to use this instead. Your call always has a space before/after.
contains(" " + m_baseCall +" "))
Mike W9MDB
On Saturday, January 27, 2024 at 04:14:00 AM CST, Uwe, DG2YCB via wsjt-devel
<wsjt-devel@lists.sourceforge.net> wrote:
Hi all,
Short information: Although I could not reproduce this unwanted effect so far,
I have now added another line of code as a test for my upcoming 'improved'
2.7.1-devel "240202" update, which has the effect that if you are in FT8 Hound
mode, all messages (below 1000 Hz) are really displayed in the right window if
they contain your own callsign.
This gives us double certainty that every report or whatever will be displayed
there in the future. However, it also has the side effect that messages to
A1BCD, for example, are also displayed there if your own callsign is A1BC. But
since this is only effective in hound mode, this should be acceptable, because
all messages on your Rx QRG are displayed there anyway.
Then we can see whether this really solves the problem or not. Depending on
this, we can decide whether we also include this additional line in our regular
WSJT-X.
The mentioned i+ update is planned to be rolled out on February 2. Those who
are interested in testing will find it here. As always, I am announcing
anything about my so-called 'improved' versions via the
wsjt-x-improved-community email reflector, as this list here is primarily
intended for our regular versions of WSJT-X.
By the way, with the "240202" update I also plan to deactivate this strange
function that pressing the RETURN or ENTER keys switches your transmitter on
when you are in FT8 Hound mode, because this confuses many OMs and makes little
sense, at least from my point of view. Tell me if there is any good reason why
this was/is necessary.
73 de DG2YCB,
Uwe
________________________________________
German Amateur Radio Station DG2YCB
Dr. Uwe Risse
eMail: dg2...@gmx.de
Info: www.qrz.com/db/DG2YCB
Am 26.01.2024 um 23:06 schrieb Andy Durbin via wsjt-devel:
>
"I have noticed the same thing at times while running as Hound in F/H where
the report from the Fox will appear in the Band Activity column but not in
the Rx Frequency column. I am presently running the "WSJT-X V2.7.1 devel
231031 Improved PLUS" version."
I think I have seen this once with ver 2.6.1. F/H QSO completed ok.
I think it's rare but not new in the versions later than 2.6.1.
It's a don't care for me as I'd prefer the RX frequency to only include decodes
at the RX frequency as designated by the RX frequency cursor. Only commenting
because I don't think it's a new bug.
Andy, k3wyc
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
