Good -- you should also find the port# is not necessary and Hamlib will, in fact, override anything you put in for port#. That's because the Flex protocol is always on port 4992. It will also complain with that same message now if you use 127.0.0.1 with that better error message.
Mike W9MDB On Friday, July 12, 2024 at 06:49:01 AM CDT, Al Groff <al.k...@yahoo.com> wrote: Mike, That seems to work AL, K0VM On 7/11/2024 10:31 PM, Black Michael wrote: > Try this DLL > > https://www.dropbox.com/scl/fi/q0s2ykjhaz19j7sv84rf6/libhamlib-4.dll?rlkey=m02sjo5hqyfqgquhasdpptals&dl=1 > > Mike W9MDB > > > > > > > On Thursday, July 11, 2024 at 11:19:02 AM CDT, k0vm via wsjt-devel > <wsjt-devel@lists.sourceforge.net> wrote: > > > > > > > > ( Wsjt_improved_AL 240712 ) > It appears to me that 240712 included a hamlib (2024-07-10) that dropped or > busted the recently included Flex cat function bypassing SSDR CAT and > providing by slice rigs. > Replacing hamlib with 2024-06-30 restored the function. > > AL, K0VM > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
