Yes I have been using without port number, Just the radios host name.
AL, K0VM
On 7/12/2024 6:51 AM, Black Michael wrote:
Good -- you should also find the port# is not necessary and Hamlib will, in
fact, override anything you put in for port#. That's because the Flex protocol
is always on port 4992. It will also complain with that same message now if
you use 127.0.0.1 with that better error message.
Mike W9MDB
On Friday, July 12, 2024 at 06:49:01 AM CDT, Al Groff <al.k...@yahoo.com> wrote:
Mike,
That seems to work
AL, K0VM
On 7/11/2024 10:31 PM, Black Michael wrote:
Try this DLL
https://www.dropbox.com/scl/fi/q0s2ykjhaz19j7sv84rf6/libhamlib-4.dll?rlkey=m02sjo5hqyfqgquhasdpptals&dl=1
Mike W9MDB
On Thursday, July 11, 2024 at 11:19:02 AM CDT, k0vm via wsjt-devel
<wsjt-devel@lists.sourceforge.net> wrote:
( Wsjt_improved_AL 240712 )
It appears to me that 240712 included a hamlib (2024-07-10) that dropped or
busted the recently included Flex cat function bypassing SSDR CAT and
providing by slice rigs.
Replacing hamlib with 2024-06-30 restored the function.
AL, K0VM
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
