Richard,
You have tried the other COM ports? While I run a linux system here, I have a
rig and computer that the port assignment changes from time to time. Also,
check again the baud rate in wsjtx, be sure it is correct for the rig being
used. This would be in Settings, in the FILE section on the main screen.
73,andy, ka2uqw
On Friday, July 26, 2024 at 07:36:06 PM EDT, Richard L Kohlhaas via
wsjt-devel <[email protected]> wrote:
I am just now trying to start using WSJT. I can receive OK, but not
transmit--PTT doesn't work. When I open the program I frequently get get a Rig
Control Error, with
invitation to reconfigure the radio. There is nothing to adjust there,
except Test Transmit, and then I get Rig Failure.
At Mike's (W9MDB) suggestion I installed the current libhamlib-4.dll, which
made no difference
The same connections to the radio( Icom 718) are used for Digipan/PSK31
which works fine. I am on COM3 for the PTT. I have Windows 11, 64 Bit.
Any ideas?
Dick W5UDM
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
