Richard,
Have you downloaded and installed the correct CODEX for your Icon? Look for
the Silicon Labs CODEX on the Icom site.
Good luck.
Danny AH6FX/W4 - Virginia
On Friday, July 26, 2024 at 10:19:56 PM EDT, Peter Sumner via wsjt-devel
<wsjt-devel@lists.sourceforge.net> wrote:
Hello Dick, Do not select a com port for ptt, please set that option to be
"CAT" for tx and then should be all okay. Use the test CAT and then test PTT
buttons to the green results.
Peter, vk5pj
On Sat, Jul 27, 2024, 09:04 Richard L Kohlhaas via wsjt-devel
<wsjt-devel@lists.sourceforge.net> wrote:
I am just now trying to start using WSJT. I can receive OK, but not
transmit--PTT doesn't work. When I open the program I frequently get get a Rig
Control Error, with
invitation to reconfigure the radio. There is nothing to adjust there,
except Test Transmit, and then I get Rig Failure.
At Mike's (W9MDB) suggestion I installed the current libhamlib-4.dll, which
made no difference
The same connections to the radio( Icom 718) are used for Digipan/PSK31
which works fine. I am on COM3 for the PTT. I have Windows 11, 64 Bit.
Any ideas?
Dick W5UDM
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
