The AGC problems I noted would likely only be a problem for a low level signal where the amplitude change could drop the signal too low.
We need to do some testing but I'm considering changing Hamlib to put all rigs on FAST AGC (if AGC is not OFF) for WSJT-X operation. So a setting of medium or slow would get changed to fast. Mike W9MDB On Friday, September 27, 2024 at 04:21:24 PM CDT, Gary McDuffie via wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote: > On Aug 7, 2024, at 10:31, Enrico OE1EQW via wsjt-devel > <wsjt-devel@lists.sourceforge.net> wrote: > > With AGC fast there is no problem on my Kenwood TS-890S and my Icom 7300. I had no problem with SF on the previous expeditions with AGC fast, slow, or medium with my 890. I run 1, 16, and 20 for the 3 speeds of AGC. They all work in almost all cases (for me). RF gain is almost always full tilt. Signals were from +18 to -15/-16. 73, Gary - AG0N _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
