Hi Dwayne,
Here's a recommended procedure for doing CW EME with WSJT-X in charge of
rig control (T/R switching and Doppler control).
1. Configure WSJT-X (and everything else) as you do for digital EME.
2. Be sure that "Settings -> Radio -> Mode" is set to "None", so that
WSJT-X will not continually reset your rig to USB or Data/Pkt.
3. Set the rig to CW mode.
4. Use the WSJT-X "Tune" button for manual T/R switching. Effectively,
you'll treat the "Tune" button as if its label were "CW Tx". WSJT-X
will generate its normal "Tune" audio tone while you're transmitting,
but the radio is in CW mode and will ignore it.
Please see if these steps work for you, and report back.
-- Joe, K1JT
On 10/22/2024 2:29 PM, Don Hawbaker WA3RGQ via wsjt-devel wrote:
I have not checked recently, but the earlier versions of WSJT would
switch the mode back to USB. CW was not allowed.
On Oct 22, 2024 at 2:11 PM, <Michael Black via wsjt-devel
<mailto:wsjt-devel@lists.sourceforge.net>> wrote:
What rig do you have?
Mike W9MDB
Sent from my iPhone
> On Oct 22, 2024, at 12:23 PM, Dwayne Sinclair AB6A via wsjt-devel
<wsjt-devel@lists.sourceforge.net> wrote:
>
> WSJT-X does a great job with EME Doppler. When switching to CW, WSJT-X will continue to track RX frequency but TX frequency will be static unless WSJT-X is TX’ing or Tune button is Pressed. Is it possible like RX, TX Split frequency is also updated while not Transmitting?
>
> Regards Dwayne AB6A
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
