Hi Reino and Charlie
Thanks for replying so quickly
W11 was telling me to do an update, but I hadn't done it when this issue came up. I completed the update but it made no difference. I haven't done the 24H major update.
I tried some of the things you suggested:
Disconnect and reconnect the usb cable
Reselect input device in wsjt x
I also noted that audacity reports an error, when I open it, so suspect whatever it is may be affecting wsjt x and audacity. Or maybe that's something else, I haven't used it for a long time...
I will have a look at audio security settings later.
Busy with other stuff today, but maybe this evening...
Will get back to you
Thanks and 73
Howard G4CCH
From: Reino Talarmo via wsjt-devel <wsjt-devel@lists.sourceforge.net>
Sent: Tuesday, December 17, 2024 8:10:00 am
To: 'WSJT software development' <wsjt-devel@lists.sourceforge.net>
Cc: Reino Talarmo <reino.tala...@kolumbus.fi>
Subject: Re: [wsjt-devel] WSJT-X 2.6.1 Error in sound input TS890s
Hi Howard,
One possible reason for the loss of the sound device is that W11 did an update and re-enumerated sound devices in your PC. You may get is back in wsjt-x by selecting another sound device in the (Settings) Audio tab and then reselect the correct USB soundcard. You may need to go out of the Autio window using the OK button before the reselection. Sometimes just disconnecting the USB cable and reconnecting it may re-enumerate the sound device correctly.
Another possibility is that you opened wsjt-x before powering up ts890s.
The third one is that W11 update also changed Audio security settings to the default and wsjt-x cannot any more access to your microphone. I think you need to go into the advanced audio settings of your PC.
From: Howard - G4CCH via wsjt-devel <wsjt-devel@lists.sourceforge.net>
Sent: Tuesday, December 17, 2024 1:23 AM
To: Charles Suckling via wsjt-devel <wsjt-devel@lists.sourceforge.net>
Cc: Howard - G4CCH <how...@g4cch.com>
Subject: [wsjt-devel] WSJT-X 2.6.1 Error in sound input TS890s
I'm hoping you can help me with this, if not then please pass me on to someone who can...
Wsjt-x has been working perfectly for years until today.
I went to use it today and found I have no audio input from my ts890s. WSJT-X reports "Error in sound input - an error opening the radio input device has occurred"
I sm using a windows 11 PC and cat control via USB.
I think all the settings in Wsjt-x are correct. I don't know if this us a WSJT-X, PC or ts890 issue. I am no PC expert, and don't want to make things worse than they already are.
Would appreciate some guidance to sort this out please.
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
