Hi all. It seems that in echo mode, WSJT-X is no longer adjusting the TX tone to compensate for doppler shift. To test this, I set up on 2 meter EME, with Doppler Tracking enabled but track mode set to none. While running echo mode I also observe the frequency of the returned echo on the WSJT-X waterfall. This morning doppler shift was at +120 Hz, and the returned echo was displayed at 1620 Hz. If TX frequency was being shifted, the echo should appear at 1500 Hz.
I am quite sure that this worked properly in earlier versions. 73, Russ - K2TXB PS: After writing the above I realized that I had ignored a much easier test. I turned on another receiver and monotored the tone from the EME rig. It always sends at 1500 Hz in echo mode, no matter if Doppler Tracking is enabled or not.. _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
