Frequency Reporting Anomaly WSJT and FT8/FT4 Launch PSK reporter or HamSpots.
Line up your radio to a non-standard FT8 frequency.Start WSJT and turn the radio dial to one of WSJT’s standard FT8 frequencies.Do not use the pull down menu to change your radio frequency, use the dial.
Observe the frequency error of your spots.HamSpots or PSK Reporter will display the frequency you originally started on rather than the current dial frequency.
How to reproduce: 1.Set Radio to 14.000 2.Launch WSJT 3.Turn the radio dial to a standard FT8 frequency.4.Observe that spots in HamSpots are not correct.You will also see that your frequency is not correct on the PSK reporter map.
5.This anomaly was also observed while running FT4. 6.Your dial frequency will display properly in DXLab Spot Collector. Rig IC7610 Serial Interface DXLab Commander WSJT Version 2.7.0 rc8 e183d4 Reporting Enabled 73, Fred WX1S
Frequency Reporting Anomaly WSJT.docx
Description: MS-Word 2007 document
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
