There was a frequency tracking issue with Icom rigs a couple of years ago where CAT could not keep up with manual tuning; hence the WSJT-X frequency and that of the rig could get out of sync. This sounds awfully similar.
I don’t recall the specific fix, except that it was resolved through adjustment of a CAT interface setting in the (sometimes confusing) extensive menu system of my rig (an IC-9700). The setting was non-intuitive but others with Hamlib experience were able to help me resolve it. On the positive side, if you search the archives for somethign along of line of "Icom, CAT, tracking, error” then the thread will turn up. Hope this helps! 73, Kevin VE7ZD/KN7Q > On Mar 2, 2025, at 10:11 AM, Laurie, VK3AMA via wsjt-devel > <wsjt-devel@lists.sourceforge.net> wrote: > > > > On 03/03/2025 4:56 am, Fred Coelho via wsjt-devel wrote: >> 1. Set Radio to 14.000 >> >> 2. Launch WSJT >> >> 3. Turn the radio dial to a standard FT8 frequency. >> >> 4. Observe that spots in HamSpots are not correct. You will also see >> that your frequency is not correct on the PSK reporter map. >> > > If the Wsjtx VFO frequency does not change following the radio than this is > expected behavior. There is a problem with your CAT connection IMO. > > de Laurie VK3AMA > (HamSpots owner) > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
signature.asc
Description: Message signed with OpenPGP
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
