Hi David I have heard that Win11 may need mic enabling in some sort of security settings.
73 Charlie DL3WDG On Sat, 5 Apr 2025 at 19:07, David Hilton-Jones via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > I think this has been addressed recently, but I can’t find a solution. > > > > I previously ran a Win 10 system but decided to replace with a new > computer (Geekom) running Win 11 > > > > I use line in and line out, and on my old computer had separate jack > sockets. > > > > The new computer has a single socket which I presume is TRRS. > > > > I bought an interface cable: > > > > > https://www.amazon.co.uk/dp/B0CMJK8B8C?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 > > > > > > > > When I activate WSJT it sends tones to the rig, so transmit is OK > > > > But I do not see any signal input from the rig. > > > > I’ve seen previous comments about needing to block DC on the Mic line, and > about adding resistor between Mic and sleeve, but trying those things > didn’t work. > > > > Am I using the correct interface cable? Am I doing something else wrong? > > > > Any help gratefully received > > > > In appreciate it’s not a WSJT software development problem, but I wanted > to ask for as wide range of help as possible! > > > David, G4YTL > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
