Hi David I have found the order in which things are plugged in on Win10 to be important. I have a simple adaptor that plugs into the combined mic/headphone socket on my WIn10 shack machine. The cable either needs to be plugged in after a restart or before the restart (can't remember exactly). Certainly if the right procedure isn't done before WSJT-X is started then it doesn't work.
73 Charlie On Sat, 5 Apr 2025 at 19:51, David Hilton-Jones via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > Thanks Charlie > > > > That seems to be set OK > > > > David > > > > *From:* Charles Suckling via wsjt-devel <wsjt-devel@lists.sourceforge.net> > > *Sent:* 05 April 2025 17:33 > *To:* WSJT software development <wsjt-devel@lists.sourceforge.net> > *Cc:* Charles Suckling <g3w...@gmail.com> > *Subject:* Re: [wsjt-devel] Audio problem after changing to Win 11 > computer with single RTTS audio connector > > > > Hi David > > > > I have heard that Win11 may need mic enabling in some sort of security > settings. > > > > 73 > > > > Charlie DL3WDG > > > > On Sat, 5 Apr 2025 at 19:07, David Hilton-Jones via wsjt-devel < > wsjt-devel@lists.sourceforge.net> wrote: > > I think this has been addressed recently, but I can’t find a solution. > > > > I previously ran a Win 10 system but decided to replace with a new > computer (Geekom) running Win 11 > > > > I use line in and line out, and on my old computer had separate jack > sockets. > > > > The new computer has a single socket which I presume is TRRS. > > > > I bought an interface cable: > > > > > https://www.amazon.co.uk/dp/B0CMJK8B8C?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 > > > > > > > > When I activate WSJT it sends tones to the rig, so transmit is OK > > > > But I do not see any signal input from the rig. > > > > I’ve seen previous comments about needing to block DC on the Mic line, and > about adding resistor between Mic and sleeve, but trying those things > didn’t work. > > > > Am I using the correct interface cable? Am I doing something else wrong? > > > > Any help gratefully received > > > > In appreciate it’s not a WSJT software development problem, but I wanted > to ask for as wide range of help as possible! > > > David, G4YTL > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
