Hi Joe,Where can we find the User guide from V 3 2.0?I will make the
translation in dutchKind regards,73's ON4CKT Rudy Https://www.qsl.net/on4ckt
-------- Oorspronkelijk bericht --------Van: Joseph Taylor via wsjt-devel
<[email protected]> Datum: 3/09/2026 20:20 (GMT+01:00) Aan:
WSJT software development <[email protected]> Cc: Joseph Taylor
<[email protected]> Onderwerp: Re: [wsjt-devel] FST4W slow speed tx periods
not transmitting (intermittent of delayed and also TUNE bug
Hi Lawrence,
Thanks for your detailed and carefully prepared report. I've
diagnosed the probable cause of this bug and have a proposed
solution. I will build the fix into a pre-release testing version
of WSJT-X 3.2.0 and send you a download link in an off-list email.
Please test it for your reported symptoms and report back to me.
-- 73, Joe, K1JT
On 9/3/2026 2:46 AM, hellozerohellozero
via wsjt-devel wrote:
From
Laurence Howell - KL7L (and from multiple 475 and 137kHz slow
speed 900 and 1800 secs users worldwide)
Operating
systems - Win 10 and 11 (maybe some are still using WIN7) -
Win 11 users seem to have more issues
Code
current w3.0.2 and at least as far back to 3.0.0 maybe further
Mode
: FST4W 900 and 1800 maybe issues with 300 secs but not seen
here
Users
affected - all that have been canvassed on working groups have
these issues and some say its been going on since the code and
fst4w code was releases
User
locations - worldwide users reporting
Issues
-
On
selection of ½ or 2/2 tx periods in say 900 or 1800 sec
mode, the Tx will not enable at the time to tx , or miss
first one or two or more periods, or miss a period after
a few good tx periods - the clear for some is to set up
mode and band set random 100% and then close wsjt, wait 15
secs and then restart program with wanted ½ or 2/2 periods
- but will occasionally not tx when it comes to the time
to tx - Everyone seems to have a non standard trick but
no one is reporting "mine works all the time" so seems
endemic - I cant get mine to behave here with any trick at
900 sec speed on tx - sometimes it behaves, sometimes not
On
pressing TUNE button - the program misses the first or
more transmission period - the clear for this is to, after
tune to restart program and do not press Tune - this
"clear" has been reported by at least 20 users (and there
arent a lot of us globally!)
The
Tx Next button at these speeds is funky - sometimes it
will tx next and sometimes not - reported by many
In
all cases Enable Tx stays lit ok
Appreciate
you looking at this for the users of these long wavelengths,
and hope this reached the right target
Very
73 and thank you for the code and support!
Laurence
KL7L and users of 475 and 137kHz globally
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
