Thanks for all the work you all do. All your programming is WAY above my pay grade!! Gary N8GT Sent from my iPhone
On Sep 3, 2026, at 2:22 PM, Joseph Taylor via wsjt-devel <[email protected]> wrote: Hi Lawrence, Thanks for your detailed and carefully prepared report. I've diagnosed the probable cause of this bug and have a proposed solution. I will build the fix into a pre-release testing version of WSJT-X 3.2.0 and send you a download link in an off-list email. Please test it for your reported symptoms and report back to me. -- 73, Joe, K1JT On 9/3/2026 2:46 AM, hellozerohellozero via wsjt-devel wrote: From Laurence Howell - KL7L (and from multiple 475 and 137kHz slow speed 900 and 1800 secs users worldwide) Operating systems - Win 10 and 11 (maybe some are still using WIN7) - Win 11 users seem to have more issues Code current w3.0.2 and at least as far back to 3.0.0 maybe further Mode : FST4W 900 and 1800 maybe issues with 300 secs but not seen here Users affected - all that have been canvassed on working groups have these issues and some say its been going on since the code and fst4w code was releases User locations - worldwide users reporting Issues - * On selection of ½ or 2/2 tx periods in say 900 or 1800 sec mode, the Tx will not enable at the time to tx , or miss first one or two or more periods, or miss a period after a few good tx periods - the clear for some is to set up mode and band set random 100% and then close wsjt, wait 15 secs and then restart program with wanted ½ or 2/2 periods - but will occasionally not tx when it comes to the time to tx - Everyone seems to have a non standard trick but no one is reporting "mine works all the time" so seems endemic - I cant get mine to behave here with any trick at 900 sec speed on tx - sometimes it behaves, sometimes not * On pressing TUNE button - the program misses the first or more transmission period - the clear for this is to, after tune to restart program and do not press Tune - this "clear" has been reported by at least 20 users (and there arent a lot of us globally!) * The Tx Next button at these speeds is funky - sometimes it will tx next and sometimes not - reported by many In all cases Enable Tx stays lit ok Appreciate you looking at this for the users of these long wavelengths, and hope this reached the right target Very 73 and thank you for the code and support! Laurence KL7L and users of 475 and 137kHz globally _______________________________________________ wsjt-devel mailing list [email protected]<mailto:[email protected]> https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
