Hmm, I wonder. Would the SRAM Braze-On adapter work with a shimano FD?
On Dec 9, 10:16 am, Jake Brown <[EMAIL PROTECTED]> wrote: > Seems like the shifters would work anyways, the left one has 3 clicks > for a triple, but it seems you can still use it. If it presents a > problem, I will just get a different shift lever for that side at a > later time. > > On Dec 9, 10:08 am, Jake Brown <[EMAIL PROTECTED]> wrote: > > > OK, I couldnt find too much from the FSA site, but the SRAM website > > says that the Rival FD that I am looking at buying is compatible with > > a 50/34 Chainring setup, which is what the FSA crank is. > > > I think then that should work. So now I just need to be sure I can use > > that with the shifter levers. > > > Thanks! > > > On Dec 9, 9:57 am, "Steven Nutt" <[EMAIL PROTECTED]> wrote: > > > > if you go to the fsa website, it should tell you what you can use, > > > maybe..I > > > think u may need to get a new FD. Just because the extremes between the > > > compact chainrings require a special FD. I think. I feel like the FD is > > > a finicky Bia bia sometimes.. > > > > On Tue, Dec 9, 2008 at 8:52 AM, Jake Brown <[EMAIL PROTECTED]> wrote: > > > > > I got an FSA compact double from Zerbe. The FD on my trek was for a > > > > triple standard that I had. > > > > > On Dec 9, 9:39 am, "Steven Nutt" <[EMAIL PROTECTED]> wrote: > > > > > What crankset are you useing? The spacing of the chainrings to the > > > > > how > > > > much > > > > > the shifter moves the FD maybe different if you are using > > > > > ULTshftrs/ULTder/sram cranks, i think..it may not be a big deal with a > > > > > standard duouble, but if you are getting a compact double, then u may > > > > need > > > > > the FD for that, i think.maybe..Zerbe robbie? > > > > > > On Tue, Dec 9, 2008 at 8:32 AM, Ryan Post <[EMAIL PROTECTED]> wrote: > > > > > > > I believe they make braze-on adapters if you wanted to use that FD. > > > > > > > -----Original Message----- > > > > > > From: [email protected] [mailto:[EMAIL PROTECTED] > > > > On > > > > > > Behalf Of Jake Brown > > > > > > Sent: Tuesday, December 09, 2008 9:23 AM > > > > > > To: WVU Cycling > > > > > > Subject: [WVU Cycling] Re: Bike Ordering and Components Help > > > > > > > Quick question: > > > > > > > I plan to use my Ultegra brake/shift levers on the new bike, but > > > > > > since > > > > > > my Trek is carbon, it has a FD that is basically attached to the > > > > > > frame. > > > > > > > From what I have been reading, there is no issue with running a SRAM > > > > > > FD with Shimano shifters. I run x7 shifters on my mtb, with an LX > > > > > > FD. > > > > > > > Can I get a double check, second opinion on this matter before I > > > > > > spend > > > > > > the money on a SRAM FD? > > > > > > > Jake-ub > > > > > > > On Dec 8, 1:20 pm, "Jonathan Zerbe" <[EMAIL PROTECTED]> wrote: > > > > > > > Triple checked. You will need the SI headset bearings for the > > > > > > > 29er. > > > > > > > > On Mon, Dec 8, 2008 at 12:34 PM, Jonathan Zerbe <[EMAIL PROTECTED] > > > > > > > wrote: > > > > > > > > I doubled checked, the road bike frame comes with a headset. > > > > > > > > Seat > > > > > > collars > > > > > > > > are included for both frames. On the 29er frames, the SI headset > > > > > > bearings > > > > > > > > press right into the frame (no cups) and should be included > > > > (definitely > > > > > > if > > > > > > > > you are getting the combo). If not, those are inexpensive too. > > > > > > > > > On Mon, Dec 8, 2008 at 11:17 AM, Jake Brown <[EMAIL PROTECTED]> > > > > wrote: > > > > > > > > >> Zerbe told me the other day that the Road bike does come with > > > > > > > >> the > > > > > > > >> integrated headset. > > > > > > > > >> On Dec 8, 10:55 am, "Larry Liewie" <[EMAIL PROTECTED]> wrote: > > > > > > > >> > Yes, seat collar and lefty headset are included but not sure > > > > about > > > > > > road > > > > > > > >> > headset. Andy.B, any comment? > > > > > > > > >> > On Mon, Dec 8, 2008 at 10:41 AM, Steven Nutt < > > > > [EMAIL PROTECTED]> > > > > > > > >> wrote: > > > > > > > >> > > and headsets? The lefty requires a special headset, i > > > > > > > >> > > think > > > > it is > > > > > > > >> included > > > > > > > >> > > with the lefty fork, bu tyou may wan to make sure. > > > > > > > > >> > > On Mon, Dec 8, 2008 at 10:38 AM, Jake Brown < > > > > [EMAIL PROTECTED]> > > > > > > > >> wrote: > > > > > > > > >> > >> Is anyone aware to whether or not the frames will come > > > > > > > >> > >> with > > > > seat > > > > > > > >> > >> collars? > > > > > > > > >> > >> If they do not, everyone keep in mind that you will also > > > > > > > >> > >> need > > > > a > > > > > > seat > > > > > > > >> > >> collar. These are usually pretty inexpensive, and you can > > > > > > > >> > >> get > > > > > > them > > > > > > > >> > >> from Pathfinder. > > > > > > > > >> > >> I recommend these to add a little "bling" > > > > > > > > >> > >>http://www.salsacycles.com/skewers.html > > > > > > > > >> > >> Happy studying, and good luck on finals! > > > > > > > > >> > >> Jake > > > > > > > > >> > >> On Dec 6, 6:42 pm, "Liewiee/Larry" <[EMAIL PROTECTED]> > > > > wrote: > > > > > > > >> > >> > Dear all, > > > > > > > >> > >> > 1)There is some unfilled information on zipp > > > > > > > >> > >> > spreadsheet, > > > > > > please > > > > > > > >> check > > > > > > > >> > >> > your zipp order and answer the question. > > > > > > > >> > >> > 2)Lefty HUB and Zipp tubular spreadsheet is up. We need > > > > the > > > > > > total > > > > > > > >> > >> > quantity ASAP so that we can order it form pathfinder. I > > > > will > > > > > > check > > > > > > > >> > >> > the price with pathfinder. > > > > > > > > >> > >> > Larry > > > > > > > > >> > >> > On Dec 6, 4:26 pm, Ryan Post <[EMAIL PROTECTED]> wrote: > > > > > > > > >> > >> > > Ok, I got a bunch of emails from people confused about > > > > what > > > > > > they > > > > > > > >> > >> needed to > > > > > > > >> > >> > > get. > > > > > > > > >> > >> > > So I asked Liew and Jake to write up a help sheet that > > > > > > itemizes > > > > > > > >> what > > > > > > > >> > >> all > > > > > > > >> > >> > > goes on a bike, and recommendations. > > > > > > > > >> > >> > >http://wvucycling.com/Members/BikeHelp.xls > > > > > > > > >> > >> > > Robbie was cool enough to do a textual write up with > > > > > > > >> > >> > > some > > > > > > other > > > > > > > >> > >> opinions and > > > > > > > >> > >> > > info. > > > > > > > > >> > >> > > The Road one hasn't been proofed yet, hopefully Robbie > > > > can > > > > > > help > > > > > > > >> out > > > > > > > >> > >> with > > > > > > > >> > >> > > that, and I'll reload the file. > > > > > > > > >> > >> > > It was suggested to have an informational meeting for > > > > these > > > > > > > >> orders. If > > > > > > > >> > >> you > > > > > > > >> > >> > > want that, it can be arranged, would likely be at bike > > > > house. > > > > > > > >> Just > > > > > > > >> > >> don't > > > > > > > >> > >> > > know around exams and all that, since we only have a > > > > week. > > > > > > > > >> > >> > > If you haven't already, need to know frame sizes by > > > > Friday. > > > > > > > > >> > >> > > DEADLINE: ALL CURRENT ORDERS MUST BE PLACED BY FRIDAY > > > > > > > > >> > >> > > I ALSO WANT $100 deposit from everyone on the team > > > > > > > >> > >> > > who's > > > > > > ordering > > > > > > > >> a > > > > > > > >> > >> bike > > > > > > > >> > >> > > that hasn't been on the team at least 3 years. Too > > > > > > > >> > >> > > much > > > > money > > > > > > to > > > > > > > >> get > > > > > > > >> > >> screwed > > > > > > > >> > >> > > on someone not picking it up after they come in. You > > > > > > > >> > >> > > can > > > > pay > > > > > > for > > > > > > > >> the > > > > > > > >> > >> bikes > > > > > > > >> > >> > > and components almost immediately next semester (I'll > > > > give ya > > > > > > 2 > > > > > > > >> > >> weeks); > > > > > > > > >> > >> > > Those wanting Zipps, I need ATLEAST half the money by > > > > Friday. > > > > > > > >> We'll > > > > > > > >> > >> check on > > > > > > > >> > >> > > the clincher availability, and whatever other notes > > > > > > > >> > >> > > were > > > > > > made. > > > > > > > >> Some > > > > > > > >> > >> people > > > > > > > >> > >> > > probably aren't going to get the 10 sets they ordered, > > > > since > > > > > > you > > > > > > > >> can > > > > > > > >> > >> only > > > > > > > >> > >> > > ride 1 bike at a time, and these quick release skewers > > > > are > > > > > > > >> amazing at > > > > > > > >> > >> > > letting you swap wheels on bikes in like under > > > > > > > >> > >> > > 30seconds. > > > > > > > > >> > >> > > If you can pay more, I'd really appreciate it. > > > > > > > >> > >> > > Otherwise, > > > > I'm > > > > > > > >> pretty > > > > > > > >> > >> much > > > > > > > >> > >> > > loaning my own money to the team to cover the orders. > > > > Zipps > > > > > > and > > > > > > > >> Bikes > > > > > > > >> > >> ain't > > > > > > > >> > >> > > cheap, I can't cover it all. > > > > > > > > >> > >> > > Hopefully the Park Order will make it before break, > > > > > > > >> > >> > > same > > > > for > > > > > > the > > > > > > > >> > >> photos. > > > > > > > > >> > > -- > > > > > > > >> > > Steven Nutt > > > > > > > >> > > [EMAIL PROTECTED] > > > > > > -- > > > > > Steven Nutt > > > > > [EMAIL PROTECTED] > > > > -- > > > Steven Nutt > > > [EMAIL PROTECTED]
