A page in your DokuWiki was added or changed. Here are the details:
Date : 2017/01/02 09:41
Browser : Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101
Firefox/45.0
IP-Address : 78.43.90.159
Hostname : HSI-KBW-078-043-090-159.hsi4.kabel-badenwuerttemberg.de
Old Revision: http://wiki.x2go.org/doku.php/doc:howto:tce?rev=1483326057
New Revision: http://wiki.x2go.org/doku.php/doc:howto:tce
Edit Summary: [Setting up your own netbootable X2Go-TCE environment]
User : stefanbaur
@@ -241,11 +241,12 @@
* ''tcpprint'' - Will allow you to use local LPT/USB printers like "dumb" network
printers (listening to port 9100 and above). Requires MAC->IP mapping in DHCP server (and
optionally, DNS->IP mapping), or static IPs - else your print jobs will end up on random
devices. This setup is preferred over the X2GoClient's built-in printing for locally attached
printers if X2GoServer and ThinClients are on the same network. It is not recommended when your
X2Go
connection goes across the internet or when the ThinClient is actually a laptop
roaming between different networks.
* ''tcpprintonlyfrom=x.x.x.x'' - Will allow you to specify which IP address may connect to Port 9100 and above for printing to a locally attached LPT/USB printer. This should be the IP of your CUPS server or whatever print server system you use. Understands the same syntax as xinetd's ''only_from''.
These are //not yet implemented//, but planned for a future release, and only intended to be used with TCE images stored on local media:
- *
''updateurl=rsync|http|ftp://your-http-server-ip-or-dns-here/path-to-update-files''
- //not yet implemented//. Will allow you to update an image in the background
when using local storage instead of PXE. Download task will start at a
randomized interval to avoid unintentional dDOSing of the update server/network
infrastructure. The updater will even work when using NTFS for local storage,
but only if the //toram// boot
option is used. Regardless of NTFS or not, the updater requires three
directories: ''/boot/live1, /boot/live2, /boot/live-download''
- * ''bwlimit=nnn'' - //not yet implemented//. Will allow you to specify a
bandwidth limit (valid values: 1-100) in percent for the backgrounded update
task.
- * ''ntfs-uuid='' - //not yet implemented//. Will be required for updating images
stored on NTFS filesystems. Full UUID as shown under /dev/disk/by-uuid/ is preferred, but
can work with the volume serial number shown in the output of "vol c:" as well.
+ *
''updateurl=rsync|http|ftp://your-http-server-ip-or-dns-here/path-to-update-files''
- Will allow you to update an image in the background when using local storage
instead of PXE. Download task will start at a randomized interval to avoid
unintentional dDOSing of the update server/network infrastructure. The updater
will even work when using NTFS for local storage, but only if the //toram//
boot option is used. Regardless of NTFS or not, the
updater requires three directories: ''/boot/live1, /boot/live2,
/boot/live-download''
+ * ''updatesleep=nnnnn'' - Will allow you to specify the upper limit (in
seconds) of the update timer's randomizer. Allowed range: 121-32767. Will
default to 900 if unset or set to an out-of-range value.
+ * ''bwlimit=nnn'' - Will allow you to specify a bandwidth limit (valid
values: 1-100) in percent for the backgrounded update task.
+ * ''ntfs-uuid='' - Will be required for updating images stored on NTFS filesystems.
Full UUID as shown under /dev/disk/by-uuid/ is preferred, but can work with the volume
serial number shown in the output of "vol c:" as well.
=== Required unless using the X2Go Session Broker: Adding the x2go-tce.sessions session configuration file to your HTTP or FTP Server ===
Again, this is assuming you already have an existing, working HTTP or FTP
server setup.
* run X2GoClient on any computer you like, and configure a session the same
way it should appear on
the ThinClient <note tip>when using a Windows client, run x2goclient.exe --portable, or it will
store the session information in the registry, rather than in a "sessions"
file.</note>
--
This mail was generated by DokuWiki at
http://wiki.x2go.org/
_______________________________________________
x2go-commits mailing list
[email protected]
http://lists.x2go.org/listinfo/x2go-commits
