A page in your DokuWiki was added or changed. Here are the details:

Date        : 2018/02/12 14:54
Browser     : Mozilla/5.0 (X11; Linux x86_64; rv:52.9) Gecko/20100101 
Goanna/3.4 Firefox/52.9 PaleMoon/27.7.2
IP-Address  : 134.3.37.90
Hostname    : HSI-KBW-134-3-37-90.hsi14.kabel-badenwuerttemberg.de
Old Revision: https://wiki.x2go.org/doku.php/doc:howto:tce?rev=1518446908
New Revision: https://wiki.x2go.org/doku.php/doc:howto:tce
Edit Summary: [What options are available under FURTHER-OPTIONS-GO-HERE?]  - 
added homepageurl description
User        : stefanbaur

@@ -882,8 +882,9 @@
   * ''blankdpmsfix'' - This forces the TFT do black for a few seconds during the X 
startup phase, then forces it back on again.  This fixes an occasional "black 
screen" issue that occurs with some flaky client/TFT hardware combinations when 
using DisplayPort connectors, and could otherwise only be remediated by manually turning 
the TFT off and back on again. (feature available via github repo, soon via
x2go repo too)
   * 
''branding=https|http|ftp://your-http-server-ip-or-dns-here/x2go-tce/x2go-tce-branding.svg''
 - use this to specify an SVG file to "brand" your X2Go-TCE with. It will 
replace the seal icon in the lower left of the login screen. See below for how to add 
this file to your HTTP, HTTPS, or FTP server.  **Attention: Whoever manages to spoof the 
server name can inject rogue images into your ThinClients.**  To mitigate this risk, use 
HTTPS, where the attacker would have to spoof both server name and matching certificate.
   * ''copysecring'' - this will scan for USB media and fixed disk media (with 
USB media taking precedence) at boot for one or more of the following 
directories: ''config/ssh'', 'ssh', ''.ssh''. The volume must be labeled 
''X2GO-TCE-LIVE'' or ''PORTABLEAPP'' and may use any supported file system. Any 
SSH Secret Keys found there will be copied into ''/home/user/.ssh'' (in the 
ramdisk), with proper permissions and ownerships for the default user account.
This may come in handy when you are using SSH Secret Keys on USB media, but 
need to log in and out of sessions often, and don't want to leave the USB media 
plugged in all the time/don't want to have to re-insert it before each session 
startup. **Attention: This poses a security risk when other people are using 
your ThinClient afterwards (as they will have access to your keys).**  To 
mitigate this risk,be sure to power-cycle the ThinClient once you are done. You 
//should// specify this parameter when booting X2Go-TCE-Live from portable 
media when you want to use SSH Secret Keys, to make sure your secret key on the 
VAT/NTFS partition is available. But as stated above, be sure to power-cycle 
the machine once you're done.
   * ''earlyblankdpmsfix'' - This forces the TFT do black for a few seconds during the 
initial boot phase (right after the squashfs was downloaded), then forces it back on 
again.  This fixes an occasional "black screen" issue that occurs with some 
flaky client/TFT
hardware combinations when using DisplayPort connectors, and could otherwise 
only be remediated by manually turning the TFT off and back on again. (feature 
available via github repo, soon via x2go repo too)
+   * ''homepageurl="URL1[|URL2|URLn]"'' - this is only available in MiniDesktop mode. It allows 
you to specify one or more web pages that show up on Browser start/when clicking the "Home" icon. 
URLs need to be separated with a ''|'', and the set of URLs needs to be enclosed in double quotes. Do //not// 
enclose each URL in double quotes separately! Correct example: 
''homepageurl="https://www.google.de|https://wiki.x2go.org";''
   * ''ldap=ldap.example.com:389:cn=cngoeshere,dc=example,dc=com'' - this 
allows you to specify an LDAP server to connect to - note that this is not 
needed for LDAP-based authentication, only when you intend to store entire 
session profiles in LDAP. You should really consider using the X2Go Session 
Broker instead.
   *
''ldap1=ldap-backupserver-1.example.com:389'' - this allows you to specify the 
first of up to two LDAP backup servers when using LDAP authentication
* ''ldap2=ldap-backupserver-2.example.com:389'' - this allows you to specify the second of up to two LDAP backup servers when using LDAP authentication * ''nodpms'' - Will not touch DPMS settings at all (by default, ''blank=0'' does both ''xset s off'' and ''xset -dpms''). Use this along with ''blank=n'' if you do want to blank the screen, but your screen is confused by DPMS settings.


--
This mail was generated by DokuWiki at
https://wiki.x2go.org/

_______________________________________________
x2go-commits mailing list
x2go-commits@lists.x2go.org
https://lists.x2go.org/listinfo/x2go-commits

Reply via email to