Hi Franck,On Di 02 Jun 2015 11:30:16 CEST, BOTZ Franck (Administrateur Systèmes et Réseaux) - DDT 67/SIDSIC/Pôle Infra wrote:
* broker
* x2gobroker-sessionprofiles.conf
* host=HostName of the server (if I use IP the resume function
did not work)
You can also use host=HostName (IP-Address) e.g. host=server2 (192.168.2.52) For load balancing host=server1 (192.168.2.51), server2 (192.168.2.52)If your DNS system is whacky or DNS is different from /etc/hostname (e.g., people connect via a gateway), then you can do this:
host=server1 (gateway.company:22051), server2 (gateway.company:22052)Where server1 and server2 are the actual hostnames of the X2Go Servers and the host address in parentheses (gateway.company:<port>) is the host address under which the X2Go Servers can be contacted by the client.
Greets, Mike -- DAS-NETZWERKTEAM mike gabriel, herweg 7, 24357 fleckeby fon: +49 (1520) 1976 148 GnuPG Key ID 0x25771B31 mail: [email protected], http://das-netzwerkteam.de freeBusy: https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.xfb
pgpjYYg7U7HTb.pgp
Description: Digitale PGP-Signatur
_______________________________________________ x2go-user mailing list [email protected] http://lists.x2go.org/listinfo/x2go-user
