Hi folks,
I've got a TT4 with Alpha 0.64 firmware up and running as an Igate. Seems to be OK but I'm running it in KISS mode with the Serial KISS interface. When I look at my raw packets on APRS.fi I only see my twice per hour beacon being sent out. I think this because I'm in KISS mode but not sure. Is that true? So if I want to act as a fill-in digi I need to drop that and use the serial TNC interface. Right? And to do that I need to change the configuration in the TT4 firmware from AMODE = KISS to AMODE = TEXT And what is the correct startup and stop files to use? They default to tnc-startup.sys and tnc-stop,sys. Other than uncomment out the line to use my alias as WIDE1-1, what else should I change? I've got things sort of working right at the moment but would like to get the last piece of my little puzzle in place before I wrap this up. I don't want to do something that is going to cause a lot of QRM, but here and on the air. :-) Thanks for any pointers! Norman KC9NVN _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
