On 01/17/2011 07:08 PM, Tom Russo wrote: > > Just a guess: > The tnc-startup.thd7 file has commands commented out at the end that enable > GPS data to be sent to Xastir. Are you using this startup script? Did you > uncomment those lines? > The thd7 script should work with one modification: Remove the command "AWlen 8" and uncomment the GPS commands in the end of the file.
I have tried to make a THD72 script to automatic enter the correct frequency and then enable the tnc but this fails. The command: FO 0,0144800000,1,0,0,0,0,0,0,10,11,004,0,00600000,0 is putting band A on 144.800MHz and TN 2,0 is enabling the TNC on band A This works but not with the FO command and i suspect that all the commas in that line is doing something in xastir. The tnc-stop.thd7 need to change "TNC 0" to "TN 0,0" -- Kai Günter Brandt LA3QMA _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
