On Mon, Jan 17, 2011 at 3:26 PM, Alex Carver <[email protected]> wrote:
> > > > If they implemented the same thing as they did in the D7 and D700 then yes, > you should see whatever you configured for GPSHEAD show up in the data > stream coming from the main serial port for the TNC. > > > > Finally got a chance to plug the TH-D72 into minicom. I went through the commands in the THD-7 init file and alas, I'm not seeing any GPS data on my minicom output. I even tried changing "LOC E 0" to "LOC E 1" to see if I could force GPS data every 10 sec but still nothing. And yes, the iGPS symbol is flashing on the display and when I go into the POS display I see lat and long and multiple satellites. So, any ideas as to what to try next? It it possible that I'm missing some configuration in either the GPS or APRS menus? 73, Harry Bloomberg W3YJ [email protected] _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
