On 03/11/2011 03:25 PM, [email protected] wrote: > tried using the d7a file still nothing guess will try soundcard setup > > > > Loyd C. Headrick > K4LCH >
Are you sure that the file is in the correct path? You have to manually set the TH-D72 in TNC mode. Start xastir. Under Interface Controll add a new "interface". Select i.e serial TNC select the correct serialport i.e /dev/ttyUSB0 Baudrate 9600 TNC Setup Filename: tnc-startup.xxx (whatever file you are using) Press View Incoming Data And then press "Start" when you have selected the interface. You should see the commands been activated by the TH-D72 and you are probably going to see some ?EH Also check the terminal window where you started xastir and/or the error logs. This should work without any problems as long as you are using the USB cable. The TH-D72 and TH-D7 is to good to be downgraded to a soundcard setup. -- Kai Günter Brandt LA3QMA _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
