Oh, Oh, Oh,
Make sure you can access your USB port from a user account. I used to run
everything from root on a Slackware box and begrudgingly switched to a
user account. When I plug something in to the USB port, I have to do a
sudo chmod 777 /dev/ttyUSB0 from a terminal, enter in the root password before
I can use the port. If you get something coming through from the 72 with a
terminal program, then what I just stated shouldn't be a problem.
Kurt KC9LDH
--- On Sat, 3/12/11, [email protected] <[email protected]> wrote:
> From: [email protected] <[email protected]>
> Subject: Re: [Xastir] th-d72a
> To: "Xastir - APRS client software discussion" <[email protected]>
> Date: Saturday, March 12, 2011, 10:42 AM
> will try that
>
>
>
> Loyd C. Headrick
> K4LCH
>
> > -------- Original Message --------
> > Subject: Re: [Xastir] th-d72a
> > From: Kurt Savegnago <[email protected]>
> > Date: Sat, March 12, 2011 11:20 am
> > To: Xastir - APRS client software discussion <[email protected]>
> >
> >
> > Put the 72 in packet mode and use a linux terminal
> program like minicom.
> > set it for 9600 and you should see somthing coming
> in. If that works, you should be able to get it to
> work with Xastir.
> >
> >
>
> Kurt KC9LDH
> >
> > --- On Sat, 3/12/11, Kai Günter Brandt <[email protected]>
> wrote:
> >
> > > From: Kai Günter Brandt <[email protected]>
> > > Subject: Re: [Xastir] th-d72a
> > > To: [email protected]
> > > Date: Saturday, March 12, 2011, 10:12 AM
> > > On 03/12/2011 05:07 PM, [email protected]
> > > wrote:
> > > > still no joy I tried everything
> > > > still showing down statis nothing from tnc
> > > >
> > > >
> > > >
> > > > Loyd C. Headrick
> > > > K4LCH
> > > >
> > > >>> From: [email protected]
> > > <[email protected]>
> > > >>> Subject: [Xastir] th-d72a
> > > >>> To: "Xastir - APRS client software
> discussion"
> > > <[email protected]>
> > > >>> Date: Thursday, March 10, 2011,
> 12:27 PM
> > > >>> I'm having issues getting xastir
> > > >>> talking to my th-d72 I have tried
> using
> > > >>> serial tnc, serial TNC with GPS on
> HSP cable,
> > > and serial
> > > >>> tnc with GPS on
> > > >>> AUX port. I can not get it to show
> up on
> > > statis
> > > >>> My port is ttyUSB0
> > > >>>
> > > >>>
> > >
> > > Are you sure that the radio is in TNC mode?
> > > Have you checked that the squelch is not open?
> > >
> > > Do you receive anything on the TH-D72 in APRS
> mode when you
> > > are NOT
> > > connected to xastir?
> > >
> > > --
> > > Kai Günter Brandt
> > > LA3QMA
> > >
> > > _______________________________________________
> > > Xastir mailing list
> > > [email protected]
> > > http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
> > >
> > _______________________________________________
> > Xastir mailing list
> > [email protected]
> > http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
>
> _______________________________________________
> Xastir mailing list
> [email protected]
> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
>
_______________________________________________
Xastir mailing list
[email protected]
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
