I am not sure where to look first ... I built a serial cable to go between my Tracker 3 and my Alinco DR-135T.
I have executed: "kisattach /dev/ttyACM0 2 12.34.56.78" ... to which the response was: "AX.25 port 2 bound to device ax0" I then opened Xastir where I had previously set my call, coordinates, etc. I am not seeing any APRS messages nor do I see how to initiate one - it is unclear if Xastir even sees the Tracker 3 or if the Tracker 3 sees the DR-135T. I can view findu stations on the Xastir map - but that's the Internet side of things. Have I missed a step in setting up Xastir? Thanks! David -- Thanks! & 73, KD4E.com David Colburn nevils-station.com I don't google I SEARCH! duckduckgo.com Network: groups.yahoo.com/group/qrv Restored to design-spec at Heaven's gate 1Cor15:22 _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
