Tom,
I didn't have ax25-apps loaded so had to do that first.
Chased the dependency nightmare and think I have everything.
"axlisten -a -c" produces no response, just a blank screen.
When I force it to stop using "CTRL-Z" it shows:
"awconfig: port 1 not active"
"awconfig: port 2 not active"
"axlisten: no AX.25 port data configured"
David
On Sun, Aug 19, 2012 at 04:50:09PM -0400, we recorded a
bogon-computron collision of the <[email protected]> flavor, containing:
Thanks for the assist!
When I enter:
"/usr/sbin/kissparms -p 2 -t 20 -s 10 -r 32 -l 20 -f n"
... the response is:
"axconfig: port 1 not active"
Weird, since your port is named "2" and you've specified it as 2. Is
kissattach running already?
Still, if you leave everything at its defaults, does axlisten show
traffic on the port? If so, then you may not need the kissparms. If
"axlisten -a -c" shows traffic, then you're probably good to go (btw,
some distros have "axlisten" and others just have "listen" --
debian-based distros use axlisten because there's some other package
that has a "listen" as well, and they're trying to deconflict them).
Regardless, you need to have Xastir set up with an AX.25 interface,
it's not enough to define one outside of Xastir.
--
Thanks! & 73, KD4E.com
David Colburn nevils-station.com
I don't google I SEARCH! duckduckgo.com
Network: groups.yahoo.com/group/qrv
Restored to design-spec at Heaven's gate 1Cor15:22
_______________________________________________
Xastir mailing list
[email protected]
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
