Tom,
Thanks again for the assist!
I have looked at the Help file and made the recommended
changes to settings in "Serial KISS TNC".
I have changed to Serial KISS TNC and have Transmit.
Now I am chasing the absence of a Receive response.
BTW: What is the purpose of the "init KISS mode at startup"
at the bottom of the Interface Control window? I had hoped it would
eliminate the extra step of Minicom to set "USBKISS on"
David
15. Use these settings:
- TNC Port: /dev/ttyACM0
- Comment: Tracker 3
- Port Settings: 115200bps
- Port Style: 8,N,1
- I-Gate Options: Disable all I-Gate traffic
- Leave the UnProto paths at defaults
- TNC Setup Filename: tnc-startup.null
- TNC Shutdown Filename: tnc-stop.sys
These confirm that you have picked the wrong type of interface for your
KISS TNC. These are ONLY applicable when the TNC has a roughly TNC2-compatible
CMD command set, and is left in CMD mode. "Serial KISS TNC" has a
completely different set of options in its dialog. KISS TNC set-up dialogs
don't have Setup and Shutdown file options.
NOTES:
D. What Xastir setting might block the transmit, please?
You've left your TNC in KISS mode, and Xastir is sending non-KISS data to it.
The TNC has no idea what to do with that data.
Delete your Serial TNC interface in Xastir, then define a Serial KISS TNC
instead.
--
Thanks! & 73, KD4E.com
David Colburn nevils-station.com
I don't google I SEARCH! duckduckgo.com
Network: groups.yahoo.com/group/qrv
Restored to design-spec at Heaven's gate 1Cor15:22
_______________________________________________
Xastir mailing list
[email protected]
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
