I checked the cable:
OT3m DR-135T
-----------------
Pin 1 to Pin 9
Pin 3 to Pin 7
Pin 5 to Pin 4
Pin 6 to Pin 5
As described in a post to the APRS list when I checked the
serial connector in my DR-135T I observed two tiny blue
wires extending from the faceplate and just floating.
It appears from a Velcro patch on the vfo shield that there
once was an internat APRS interface - could these be related
to that and may be ignored?
Or might they be a source of trouble?
Meanwhile I will check the receive line of the cable
between the DR-135T and the Tracker3 and the inside connection
of the connector - interface - and rig. Perhaps something
somewhere is loose.
Thanks!
David
--
Thanks! & 73, KD4E.com
David Colburn nevils-station.com
I don't google I SEARCH! duckduckgo.com
Network: groups.yahoo.com/group/qrv
Restored to design-spec at Heaven's gate 1Cor15:22
_______________________________________________
Xastir mailing list
[email protected]
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
