I have already fixed the problem. In MacOS it show 2 entries for USB devices
dev/tty.usbdevice dev/cu.usbdevice After switching from tty.usbdevice to cu.usbdevice everything worked perfectly as can be seen by looking for WF8S-5. Jacob Tennant WF8S Sent from my Samsung smartphone on AT&T -------- Original message -------- From: "Curt, WE7U" <[email protected]> Date: 05/09/2013 1:27 PM (GMT-05:00) To: Xastir - APRS client software discussion <[email protected]> Cc: [email protected] Subject: Re: [Xastir] MacOS/Xastir problem On Tue, 7 May 2013, Jacob Tennant wrote: > Whenever I try to activate a serial tnc connection it causes my Xastir > instance to freeze for about 30 seconds then the serial port never opens? > > I have checked that all of the configuration is correct duch as > /dev/tty.usbserialFTDI845 for the serial port and I have use a terminal > program to talk to the tnc and everything runs fine there. > > Any suggestions? Who is the group owner of that device? Have you added yourself to that group and logged out/in again to gain the new group? Are the group permissions set properly on that port so that both the owner and the group can read/write the port? If all else fails, have you tried setting Xastir SUID root to see if that overcomes the issues? (As root: "chmod 4755 /usr/local/bin/xastir") On this OpenSuSE system the ports look like this: $ cd /dev $ ls -al | grep ttyS crw-rw---- 1 root dialout 4, 64 Apr 8 09:11 ttyS0 crw-rw---- 1 root dialout 4, 65 Apr 8 09:11 ttyS1 crw-rw---- 1 root dialout 4, 66 Apr 8 09:11 ttyS2 crw-rw---- 1 root dialout 4, 67 Apr 8 09:11 ttyS3 crw-rw---- 1 root dialout 4, 68 Apr 8 09:11 ttyS4 crw-rw---- 1 root dialout 4, 69 Apr 8 09:11 ttyS5 crw-rw---- 1 root dialout 4, 70 Apr 8 09:11 ttyS6 crw-rw---- 1 root dialout 4, 71 Apr 8 09:11 ttyS7 So I would add my user to the "dialout" group and log out/in again to be able to use the ports. Both the owner "root" and the group "dialout" for these ports are marked "rw". The serial port names I'd specify in Xastir would be "/dev/ttyS0" or "/dev/ttyS1". I'm not using USB->Serial adapters at work or at home to talk to TNC's. I found them problematic at home so went to real serial port cards. Some of course don't have that option. -- Curt, WE7U. http://wetnet.net/~we7u U.S. Weather Alerts: Firenet.us, port 14580, filter "t/n e/WE7U-WX" _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
