D'Oh! Thank you! Clay N7QNM
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Brett Friermood Sent: Thursday, March 6, 2014 11:08 AM To: Xastir - APRS client software discussion Subject: Re: [Xastir] No stations The m/100 filter references your position. Without the server ever knowing your position (you have transmit disabled) it cannot send information back for stations within the defined range around your station. Since you want to receive only, using an r/.... filter will provide the same filtering but as a range around a defined latitude/longitude reference. Brett KQ9N On Thu, Mar 6, 2014 at 11:29 AM, Clay Jackson <[email protected]> wrote: > I just built up a TNC-Pi and have that set up running a Digi/iGate > combination (at least I think it's configured correctly) as SSID PROSSR. > Last nite, I turned off the TNC interface on my Xastir instance. The only > interface I'm running now is to firenet.us, port 14580, with transmit > disabled. > > The problem is that all I'm seeing is my station (N7QNM, no SSID) and > WX-ALERTS; NO other stations (including the beacon from the Pi/TNC). > My filter is set to: > m/100 e/WE7U-WX > > If I use findu or aprs.fi; I can see other stations around me, including > one's I'm digi'ing and igating. I'm sending my igate packets to noam.aprs2 > > I'm sure I've done something stupid; can't figure it out :-) > > Anyone got any suggestions on at least where to look? > > Thanks! > > Clay Jackson > > > _______________________________________________ > Xastir mailing list > [email protected] > http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
