Hi, I disassembled all the cables and double-checked that all the cables are as they should be.
Just a question on the transmit part: Below is an excerpt from the data monitoring terminal. I noticed that the Converse character "K" is sent after the "TX->" part. I assume it is only displayed like that and that the TNC is placed in converse mode before the transmission (Sending "K" before the actual transmission). TX->ZS6XOX-10>APX204,WIDE2-1:=2612.15S/02815.28EyPHG8130Debian [email protected] 0739347438 TNC->MYCALL ZS6XOX-10 TNC->UNPROTO APX204 VIA WIDE2-1 TNC->K TNC->=2612.15S/02815.28EyPHG8130Debian [email protected] 0739347438 > > > The problem is that even though it shows the "TX->" part in the "Display > > Packet > > Data" window, the red TX L.E.D does not light up ... A little off-topic ... Xastir freezes when it tries to play the notification sounds even though the sounds play perfectly via the command line ... 73's Danny _______________________________________________ Xastir mailing list [email protected] http://xastir.org/mailman/listinfo/xastir
