Hey, Curt,thanks for the replies. I have the I-gating set up as you suggested.
We're using noam.aprs2.net as the server and the code that callpass generated
when we used it.
When you talk about the firenet server stuff, how would I use that? Do I set up
another internet interface?
Thanks again,Mickey
From: Curt Mills <[email protected]>
To: Halley Melinda <[email protected]>; Xastir - APRS client software
discussion <[email protected]>
Sent: Thursday, February 16, 2017 4:36 PM
Subject: Re: [Xastir] Couple of Small Problems, Maybe?
On Thu, Feb 16, 2017 at 12:56 PM, Halley Melinda <[email protected]> wrote:
Hey David,This is Mickey, Flip's wife. the xastir site has "TBD" on the section
for Igating. Other than how to turn on igating, there's no help.
The most up-to-date docs would be the text files with the code. The Wiki pages
won't be as complete.
For igating there are two places to tweak in Xastir:
1) File -> Configure Defaults -> IGate Options2) Interface -> Interface Control
-> Add -> Internet Server -> Add -> Put in options there for the particular
APRS-IS server you want to connect to.
I'd recommend checking "Activate on Startup?" "Allow Transmitting", and
"Reconnect on NET failure?". You'll need to put in Host, Port, and Pass-code
there.
Also note that you can click on the dashed-line on the drop-down windows to
chop them off and make them stick around for a bit. You can then hit the 'X' in
the corner to make them go away.
Also on the "Interface" menu is "Disable Transmit: ALL". Do NOT check that.
--
Curt, WE7U
http://we7u.wetnet.net
http://www.sarguydigital.com
_______________________________________________
Xastir mailing list
[email protected]
http://xastir.org/mailman/listinfo/xastir
