Hi David Nothing changed on my pi configuration. But I rebooted the pi by cycling the power on the pi and ran xastir with the language fix and am happy to report that it has been stable now for almost one hour. I have not tried to run xastir without the language fix. I may try that later. It looks like the language fix is good. I shall add the fix to my xastir shortcut. Thanks all.
Joe VA3JLF Sent from Mail for Windows 10 From: David Ranch Sent: Wednesday, December 5, 2018 10:15 PM To: Xastir - APRS client software discussion Subject: Re: [Xastir] xastir strange behaviour How is the Pi communicating to the TNC-Pi? Over the serial port or over I2C? If over serial, are you sure you disabled the console over serial port feature? --David KI6ZHD On 12/05/2018 07:08 PM, Joseph LaFerla wrote: > Hi Tom > > I did this and it took the character /260 error off so that is no longer a > problem. However the problem with the strange characters and line feeds from > the tnc continues. I wonder if this has to do with the tnc because the > packet data from the net display correctly all the time. I have restarted > the tnc pi several times but I will try tomorrow to do it again, maybe the > two problems were feeding on each other. I will let you know the results. > > Joe VA3JLF _______________________________________________ Xastir mailing list Xastir@lists.xastir.org http://xastir.org/mailman/listinfo/xastir _______________________________________________ Xastir mailing list Xastir@lists.xastir.org http://xastir.org/mailman/listinfo/xastir