On Tuesday, February 5, 2019 7:58:43 AM PST Jim Darrough wrote: > I've seen this mentioned a few times, but I need to get current and > appropriate input on how to start Xastir upon boot of the RPi.
For a program like Xastir that has a GUI you need to edit the desktop autostart file. On the raspberry pi it's found at: ~/.config/lxsession/LXDE-pi/autostart nano ~/.config/lxsession/LXDE-pi/autostart and add a line like this to the end. @xastir That should cause xastir to start up after the desktop is up. NOTE: The vast majority of my RPi are all headless so I haven't tried this with Xastir but it is the standard way of autostarting applications on the desktop. Ken, N7IPB > Also have a question on how to set transmit delay so that the > transceiver has time to develop power before the data stream starts. On > a KPC3+ this was done by setting TXD to 60. Not at all sure how to do > with RPi3/Pi-Tnc/Xastir. > > Thanks for any comments. > > 73 Jim Darrough, KI7AY EM25pd -- Ken - N7IPB Email: [email protected] JID: [email protected] SvxLink Repeaters: http://pnw220.wetnet.net PGP Sig: F42B EF90 3CD3 31C7 3056 122E 993A 7B2E 5138 C42A “Contrariwise,' continued Tweedledee, 'if it was so, it might be; and if it were so, it would be; but as it isn't, it ain't. That's logic.”
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ Xastir mailing list [email protected] http://xastir.org/mailman/listinfo/xastir
