Thanks Max and Ray for answers.Alright, all is running fine with :-common
axport F4ACU-3 with Baycom- aprx F4ACU-3- Xastir F4ACU-15 (now in RX only)73 de
F4ACUMatthieu
-------- Message d'origine --------De : vk2tv <[email protected]> Date :
18/09/2019 23:57 (GMT+01:00) À : [email protected] Objet : Re: [Xastir]
Xastir and another APRS program I must have missed this one.1. Give aprx a
callsign-SSID - e.g. F4ACU-3 *2. Give Xastir a different callsign-SSID - e.g.
F4ACU (implies F4ACU-0) * * They need to be different to steer incoming
traffic to the right program.3. Give axports a callsign-SSID (e.g. F4ACU-4) OR
an alias, with or with out a SSID - e.g. I used to use KEMPC-1, KEMPC-2, etc
(my town was Kempsey) in axports. Kernel AX25 only uses the axport's
configured callsign with tools like "call" (axcall) and beacons, and TCP/IP if
that is configured in kissattach. Using an alias-SSID may not be legal in some
countries.I used multiple programs sharing ax25 ports for years with my big
packet BBS/Node system and it works well. I used alias-SSID in axports because
I'd run out of callsign-SSID combinations.Ray vk2tvOn 18/9/19 10:53 pm, Max
Harper wrote:> I'm pretty sure you can set it up like you want. I went to
start up xastir on my pi3 and for some strange reason it won't run so I can't
look at my settings for you. To keep the clutter on the map down, I only used
xastir to display what my station hears, it never beaconed, aprx did that.> Max
KG4PID> On Tuesday, September 17, 2019, 03:32:50 PM CDT, MLHPUB
<[email protected]> wrote:> > Hi all,>> Maybe a "stupid" question ?>> On a
Linux computer, I now run Aprx full-digipeater F4ACU-3 (defined> like this with
"mycall") with one AX25 port defined as F4ACU-3 in> /etc/ax25/axports and I
want to add a graphical view with, of course,> Xastir.> I know it is possible
to use multiple programs with the same AX25 port,> what I want to do.>> In this
case, how should I configure Xastir for "mycall" parameter ?> -> if I use
F4ACU-3, this callsign will be both for Aprx and Xastir. Not> really good.> ->
is it possible to use F4ACU-0 with AX25 port defined as "F4ACU-3" ?>> Thanks
for your help !>> 73 de F4ACU>> Matthieu>
_______________________________________________> Xastir mailing list>
[email protected]> http://xastir.org/mailman/listinfo/xastir> >
_______________________________________________> Xastir mailing list>
[email protected]>
http://xastir.org/mailman/listinfo/xastir>_______________________________________________Xastir
mailing [email protected]http://xastir.org/mailman/listinfo/xastir
_______________________________________________
Xastir mailing list
[email protected]
http://xastir.org/mailman/listinfo/xastir
