It’s been a while since I ran xastir on the Mac, but I rarely have serial port permissions problems on the Mac.
Sorry if I’m repeating someone else, but make sure that there is no start or stop scripts on that port in xastir. -Jason > On Feb 8, 2021, at 3:49 PM, Eric Chamberlain <ericchamberl...@mail.com> wrote: > > I will admit, I missed that AMODE setting when I was reading those commands. > Yeah its probably TEXT. Now that I know about the 4555 permission and the > use of root permissions and the dialout group, I went back over to the RPi > where I actually want to run this. I set it to Serial TNC and everything > works now. I see packets coming in the view-incoming data window. And the > transmitter is showing up on my map along with its vector. For the > startup/shutdown scripts, I specified empty files since it doesn't seem to > have commands necessary to get going. I appreciate everyone's help today. > I'll keep looking at why my mac isn't opening the port correctly, but I won't > bother you until I resolve it. Hopefull this thread will nonetheless be > useful for other hams getting started on APRS. > > The backstory to this project is for my kids to run the hound dog afield and > have a RPi running APRS to track it. That's why you see the KC3OBB, my son. > I'm AB3OO. My daughter is working on hers so she can get a callsign on the > TT3. I chose these devices in particular for their light portability, > despite their less common usage among the ham community. If you ever see > either of these callsigns on APRS from 15642, you'll know we're chasing some > game. Thanks again everyone. > 73 > Eric AB3OO > > > > > Sent: Monday, February 08, 2021 at 4:31 PM > From: "Brett Friermood" <brett.frierm...@gmail.com> > To: "Xastir - APRS client software discussion" <xastir@lists.xastir.org> > Subject: Re: [Xastir] Tinytrak TNC not opening interface > Eric, > > If you haven't seen it yet, the quick start guide for the TinyTrak4 is > available here: > https://www.byonics.com/downloads/TinyTrak4%20Quick%20Start%20Guide%20v0.7.pdf > This as well as the full manual have a lot more information on > configuration, but here is a list of steps to switch it over to KISS mode > quickly: > > - Configure Putty for the proper port and 19200 baud > - Cycle the power on the TT4 and watch for "Press ESC 3 times to enter TT4 > Options Menu" > - Press the escape key 3 times quickly and the TNC will enter menu mode > - Type "AMODE" and it will output the currently configured operating mode. > (Most likely "TEXT" judging by your posted output) > - Type "AMODE KISS" to change the operating mode > > Brett KQ9N > > >> On Mon, Feb 8, 2021 at 3:25 PM Eric Chamberlain <ericchamberl...@mail.com> >> wrote: >> >> Thanks Tom. I'm not sure I seen any written specification for KISS, so >> that helps. Also, nice signature. Pipes are always fitting for hams. >> >> >> >> >> Sent: Monday, February 08, 2021 at 4:16 PM >> From: "Tom Russo" <ru...@bogodyn.org> >> To: "Xastir - APRS client software discussion" <xas...@xastir.org> >> Subject: Re: [Xastir] Tinytrak TNC not opening interface >> This is still not KISS, it's regular ASCII APRS packets. It needs to be >> a Serial TNC and not a Serial KISS TNC interface in Xastir. >> >> If it still hangs trying to open the interface, though, the issue is not >> with >> the data but with the serial port configuration --- either something's >> amiss >> with permissions, settings, or the port name. >> >> On Mon, Feb 08, 2021 at 10:14:28PM +0100, we recorded a bogon-computron >> collision of the <ericchamberl...@mail.com> flavor, containing: >>> Here's the new packet data from putty with the updated TT3 configuration: >>> >>> KC3OBB-1>APT314,WIDE1-1,WIDE2-1:!4015.89N/07946.07W>198/000/TT3 >> ROCKET|!&#b'O|!wLD! >>> KC3OBB-1>APT314,WIDE1-1,WIDE2-1:!4015.89N/07946.07W>198/000|!'#c'N|!wIJ! >>> KC3OBB-1>APT314,WIDE1-1,WIDE2-1:!4015.89N/07946.07W>198/000|!(#c'L|!wGH! >>> KC3OBB-1>APT314,WIDE1-1,WIDE2-1:!4015.89N/07946.07W>198/000|!)#c'K|!wDP! >>> KC3OBB-1>APT314,WIDE1-1,WIDE2-1:!4015.89N/07946.07W>198/000/TT3 >> ROCKET|!*#c'I|!wGS! >>> KC3OBB-1>APT314,WIDE1-1,WIDE2-1:!4015.89N/07946.07W>198/000|!+#c'H|!wKS! >>> >>> _______________________________________________ >>> Xastir mailing list >>> Xastir@lists.xastir.org >>> http://xastir.org/mailman/listinfo/xastir[http://xastir.org/mailman/listinfo/xastir] >> >> -- >> Tom Russo KM5VY >> Tijeras, NM >> >> echo "prpv_a'rfg_cnf_har_cvcr" | sed -e 's/_/ /g' | tr [a-m][n-z] >> [n-z][a-m] >> >> _______________________________________________ >> Xastir mailing list >> Xastir@lists.xastir.org >> >> http://xastir.org/mailman/listinfo/xastir[http://xastir.org/mailman/listinfo/xastir][http://xastir.org/mailman/listinfo/xastir[http://xastir.org/mailman/listinfo/xastir]] >> _______________________________________________ >> Xastir mailing list >> Xastir@lists.xastir.org >> http://xastir.org/mailman/listinfo/xastir[http://xastir.org/mailman/listinfo/xastir] >> > _______________________________________________ > Xastir mailing list > Xastir@lists.xastir.org > http://xastir.org/mailman/listinfo/xastir[http://xastir.org/mailman/listinfo/xastir] > _______________________________________________ > Xastir mailing list > Xastir@lists.xastir.org > http://xastir.org/mailman/listinfo/xastir _______________________________________________ Xastir mailing list Xastir@lists.xastir.org http://xastir.org/mailman/listinfo/xastir
