William,

Thank you for the effort.

Hopefully this will put this issue to sleep. We all have dealt with this sequencing issue.

This will help others, not just us, with the dongle sequencing issue.

73 from 807,

Richard, N6NKO


William Gery wrote:
USB to serial adapters have unique device ids ( serial numbers ) The serial number can be found in the file /proc/bus/usb/devices Since I have several, I connected them one at a time and copied down the number.
Then a rule was created for each which creates symbolic links when the
USB adapters is plugged in. The software using the interface is
configured to use the alias. Example for xastir I have three TNC/s
connected.   /dev/ttytnc0, /dev/ttytnc1, and  /dev/ttytnc2 which
correspond to device 0, device 1 and device 2 for xastir interfaces. In
this way the actual /dev/ttyUSB does not matter since the software used
the symbolic link dev which is based on the USB adapters serial number.
Six of the 7 usb adapter shown below are from the same manufacturer. Hope this helps

sample 25-usbserial.rules in /etc/udev/rules.d Fedora core 4 and 5


#KERNEL="tty[A-Z]*", SYSFS{serial}="FTCCGJQ8", SYMLINK="ttyT4"
MODE="0666"
KERNEL="tty[A-Z]*", SYSFS{serial}="FTCCGJQ8", SYMLINK="tty706",
MODE="0666"
KERNEL="tty[A-Z]*", SYSFS{serial}="FTCAA03O", SYMLINK="ttyWX",
MODE="0666"
KERNEL="tty[A-Z]*", SYSFS{serial}="FTCBXBA8", SYMLINK="ttytnc2",
MODE="0666"
KERNEL="tty[A-Z]*", SYSFS{serial}="FTC9S453", SYMLINK="ttytnc1",
MODE="0666"
KERNEL="tty[A-Z]*", SYSFS{serial}="FTCBX94P", SYMLINK="ttytnc0",
MODE="0666"
KERNEL=="tty[A-Z]*", SYSFS{serial}=="ftCCDAR5", SYMLINK="ttypsk",
MODE="0666"
KERNEL="tty[A-Z]*", DRIVER="pl2303", SYMLINK="tty756", MODE="0666"

On Sat, 2006-09-23 at 08:43 -0500, Richard, N6NKO wrote:
There was a previous discussion on this topic concerning the issues of USB/serial adapter port assignments and hotplug.

I may have a solution to the assignment issue. If you want to have several port adapters on USB but always have them assigned to particular ports, then buy a couple of adapters from different manufacturers so each one is unique. That should make the USB id unique also. Now write a hotplug script that when it sees a particular ID come online to assign the adapter to a specific /dev/? port.

73 from 807,

Richard, N6NKO

_______________________________________________
Xastir mailing list
[email protected]
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
_______________________________________________
Xastir mailing list
[email protected]
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir

Reply via email to