I have resisted so far but I feel compelled to chime in on this discussion. About 12-13 years ago I purchased a Peet Bros. Ultimeter II station at Dayton. I don't remember the exact cost but I think it was about $300. Pretty pricey, particularly considering my erratic employment at the time. I set it up and it worked like a charm. There was plenty of info on their web site for interfacing the sensors to TNCs or computers and an email or call was helpful and friendly. Over the years I have moved a couple of times and set up the sensors a few more. Along the line one of the cups on the wind sensor broke (I suspect UV degradation) but was able to order replacements for this 10 year old sensor. I had a couple of issues with the Rain sensor and it has finally failed and I have not been able to bring it back to life. I suspect it is other than the sensor itself. I built a "Pagoda" radiation shield for the Temp sensor about 5 years ago and the UV is starting to get to it. Funny that half the bowls are fading and the others don't seem to have changed. I will be interested in Gerry's reply about the radiation shield.

I purchased a Lacrosse unit from Sam's Club a year ago. At $100 it seemed a decent deal. Wrong, nothing worked well. The Temp was always 5 deg. different than what was being reported by my Ultimeter II which was usually within a degree of what the NWS station 2 miles away was reporting. Unfortunatly that 5 degree difference was sometimes higher and sometimes lower and no rhyme or reason. The Rain gauge was wildly erratic reporting flooding rain on the driest days.

After performing some maintenance on my antennas one day I was cranking up the tower and missed that the wires leading to both the Peet and Lacrosse Wind sensors had caught on a support. THWAK, both wires broke. One day I will fix one of them. Shortly thereafter the Lacrosse unit quit giving any reading at all from the remote sensors.

I keep looking at possible replacements and have been eyeing the AAG- Dallas one-wire units. I would like to put something up at a couple of digi sites.

I want a new home station but I want to have one set of sensors that will show up on displays in the Bedroom, Kitchen, Living Room and Ham Shack as well as interface with Opentracker or Xastir or both. I have looked at both Peet and Davis and can get most done with either one but not everything and it would cost about $1000+ to do it.

So I keep reading and waiting and one day will try to repair my existing units.

Bruce

--
Bruce W. Martin, KQ4TV
Trustee for NT4UX
Nashville Linux User Group - Amateur Radio- Special Interest Group
NLUG-AR-SIG


_______________________________________________
Xastir mailing list
[email protected]
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir

Reply via email to