Many thanx, Gerry.... Minicom shows "stuff" coming through at 4800
baud..... The guy that lent the KAM to me said that it was header info.
Do you think that it should be ASCII? I get nothing at 2400 or 9600 baud.
Does minicom set the parameters of the port permanently or only when
minicom is running?
Also, running GPSMan allows setting a number of parameters, but not the
interface speed or configuration. Does XASTIR need to have an
interface selected to communicate with the Rinos and if so, which one?
Many thanx.............. jt
Gerry Creager wrote:
Fire up a copy of minicom and see if you can talk to the serial port
as a 'regular' user. If not, you can tell the serial port that you
(as a regular user) can access it... We can help with all the bad ways
to do that...
gerry
Jim Tolbert wrote:
After a disk crash in a laptop, I replaced the hard disk, reloaded
open SUSE 10.2, rebuilt Xastir with all the options ( including
GPSMAN), and reloaded all the maps.. I connected a KAM TNC to the
serial port and selected Serial TNC in the interface control. I
have tried a variety of TNC port identifiers ( /dev/ttyS0, COM1,
etc.) and tried "tnc-startup.kam" as well as "tnc-startup.sys".
Checking the Incoming data window when I turn the KAM on and off
yields nothing. I also tried using a USB to serial converter with
the same null result.
When I connect the laptop to the internet, I can see and plot aprs
stations.
Tomorrow, I will have access to a set of Garmin Rinos for the
afternoon. I have 22 hours to get this going <grin>.
Is it immediately obvious where my error is? Is there a way to
confirm that the serial port is functional? Is there anything
special about connecting a Rino to the laptop that would increase the
likelihood of the system work? Any other suggestions? One of the
other guys has the other laptop that is running Xastir ( from a
binary download running on VMWare). Unfortunately, it was not
compiled with GPSMAN so the Rino options are not available.
Many thanks ............. jt
--
Jim Tolbert
RiverRidge Consulting, LLC
PO Box 536
Webster, WI 54893
715-866-4398 home office
715-349-8993 fax
[EMAIL PROTECTED]
_______________________________________________
Xastir mailing list
[email protected]
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
