On Thu, 6 Mar 2008, Marek Kozubal wrote: > My station is W1CLA-1 and the raw packet from the script looks like this > (taken from FindU after it went out on the net): > W1CLA-1>APVR30,TCPIP*,qAC,T2POLAND:;IRLP-4942*061745z4218.46NI07108.24W0446325-146IDLE > > Ideally any of these sorts of OBJECTs that come through I think should be > forwarded to RF since there are at least 3 other of these nodes near by. > > Under the interface settings for the TNC, i have > > Path 1: APX190 via WIDE2-2 > Path 2: APX190 via is blank > Path 3: APX190 via is blank > IGate -> RF Path: WIDE2-2 > > and allow INet->RF & RF->INet is selected.
Enable that for each interface (Properties dialog) you wish to transmit the stuff, plus enable the same option in File->Configure->Defaults. See "README" and the Xastir online help (inside the program itself, the "Configure Default Operation" section) WRT the nws-stations.txt file. This is the file which tells Xastir which "FROM" callsigns to gate data to RF for. By default Xastir only gates messages and message ack's/nak's to/from RF if you enable the INet->RF options. -- Curt, WE7U: <www.eskimo.com/~archer/> XASTIR: <www.xastir.org> "Lotto: A tax on people who are bad at math." -- unknown "Windows: Microsoft's tax on computer illiterates." -- WE7U The world DOES revolve around me: I picked the coordinate system! _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
