There is no indication at all in the View Incoming Data that it sees
the d700, the lights at the bottom of the screen are red indicating an
interface is set up for that channel but nothing happens when I
attempt to start the d700 dialog. At this point I'm still thinking it
does not see tnc-startup.d700, I sure don't know why... I tried
putting the full path to it in the interface setup but that didn't
work either.
I know we are running out of ideas here but ........
On Apr 11, 2008, at 1:29 PM, Curt, WE7U wrote:
On Fri, 11 Apr 2008, Keith Kaiser wrote:
Xastir wasn't able to open the TNC interface at all, or didn't find
the tnc-startup.d700 file?
Well, that's a good question. How can I validate that it is opening
or at
least trying to open it? Is it possible to put a little note in
the .d700 file
that will display on screen or something?
I think you should be able to see messages come back from the D700
on the "View->Incoming Data" dialog.
Is the indicator on the status line for your D700 green or red? The
very bottom one for that interface number... There should be a red
arrow that lights up going right or left right above it to show data
being transferred. This should happen when you first open up the
interface as the tnc-startup.d700 file is transferred line-by-line
to the radio.
--
Curt, WE7U. archer at eskimo dot com
http://www.eskimo.com/~archer
Lotto: A tax on people who are bad at math. - unknown
Windows: Microsoft's tax on computer illiterates. - WE7U.
The world DOES revolve around me: I picked the coordinate system!"
_______________________________________________
Xastir mailing list
[email protected]
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
