Hello @ all and tnx for your answers! The Landolt TNC runs with firmware TF2.7 (The Firmware), but it is possible to put it into KISS mode with the following sequence: "ESC" @K
I tried a lot this weekend and finally got it to work with your describes KISS mode, but it seems quite unstable. So I still have some questions left: Do I have to check the box "activate KISS mode at startup" or is it enough to put the TNC "manually" to the KISS-mode as described above or do I have to activate both? It seems that I have sometimes trouble in receiving packets, transmitting is no problem, but sometimes, no packets are coming through, although the TNC shows receiving activities, nothing gets decoded. Is there a possibility to include the script kiss-off.pl into the shutdown of Xastir? That would be a great thing, so you don't have to do it seperately. Thanks again for your help. Have a nice week. Rainer, DL5PD Am Samstag, 31. Mai 2008 18:16 schrieben Sie: > On Sat, 31 May 2008, Rainer DL5PD wrote: > > I want to integrate my TNC 2C manufactured by a german company called > > Landolt... > > What firmware does that TNC run? It's quite possible that it's not > TAPR-2 compatible firmware, in which case Xastir won't work with the > regular user-mode command structure. > > Does it have KISS mode in it? If so, you can put it into KISS mode > and open up a Serial KISS TNC interface in Xastir to use it. When > done and you want to switch back, there's a script that comes with > Xastir called kiss-off.pl you can use to kick the TNC back into > normal command mode. _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
