On Mon, 23 Jun 2008, Chris Moulding wrote: > I've got the transmit side working OK using an OT1+ tracker with direct
> I notice that there is no data rate option in the AX25 serial modem > interface setup box. Is there a way to set it up so that it can use the > raw off-air 300 baud data without an intervening KISS TNC? That's chosen by the particular hardware you're using. > I think it > will work the same as a Baycom modem except at 300 baud? If the AX25 > data rate can be changed from 1200 baud to 300 baud then it should work > on transmit as well? If you're use the "soundmodem" driver in Linux to do a software TNC function, then you can select the baud rate and tones via the "soundmodemconfig" program for that audio channel. When you use external hardware like an OT1+, the RF baud rate and tones are determined by the firmware inside the hardware device. -- Curt, WE7U. archer at eskimo dot com http://www.eskimo.com/~archer Lotto: A tax on people who are bad at math. - unknown Windows: Microsoft's tax on computer illiterates. - WE7U. The world DOES revolve around me: I picked the coordinate system!" _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
