I think it's working now. monshow pcpmon nodeXY still is silent, but tabdump performance shows up with the data.
Bert > -----Original Message----- > From: Wiegers, Bert [mailto:bert.wieg...@t-systems-sfr.com] > Sent: Thursday, September 08, 2011 9:27 PM > To: xCAT Users Mailing list > Subject: Re: [xcat-user] Monitoring with pcp > > Well, I expected it to work now. > I'll have to go deeper into that. > > > -----Original Message----- > > From: Ling Gao [mailto:ling...@us.ibm.com] > > Sent: Thursday, September 08, 2011 8:48 PM > > To: xCAT Users Mailing list > > Cc: xCAT Users Mailing list > > Subject: Re: [xcat-user] Monitoring with pcp > > > > Bert, > > Is this the reason why pcpmon does not work? We do not have a cluster > > that has pcp setup now to > > check, pcpmon was developed long time ago. Any input from the user is very > > helpful to us. > > > > Thanks, > > > > Ling > > > > Ling Gao > > Poughkeepsie Unix Development Lab > > IBM Systems and Technology Group > > Internal: T/L 293-5692 > > External: ling...@us.ibm.com, 845-433-5692 > > > > "I never worry about the future. It comes soon enough." --- Albert Einstein > > > > > > > > From: "Wiegers, Bert" <bert.wieg...@t-systems-sfr.com> > > To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net> > > Date: 09/08/2011 02:37 PM > > Subject: Re: [xcat-user] Monitoring with pcp > > > > ________________________________ > > > > > > > > > > pcp_collect uses a program called pmdumptext > > > > This one seems to be missing in the pcp - sources (version 3.5.8) > > > > You will find it in pcp-gui... > > > > > > Bert > > > > > > > > > -----Original Message----- > > > From: Wiegers, Bert [mailto:bert.wieg...@t-systems-sfr.com > > > <mailto:Bert.Wiegers@t-systems- > > sfr.com> ] > > > Sent: Tuesday, August 30, 2011 3:57 PM > > > To: xCAT Users Mailing list > > > Subject: Re: [xcat-user] Monitoring with pcp > > > > > > It's working (had this issue before). > > > > > > > > > > > > Bert > > > > > > > > > > > > From: Ling Gao [mailto:ling...@us.ibm.com <mailto:ling...@us.ibm.com> ] > > > Sent: Tuesday, August 30, 2011 3:53 PM > > > To: xCAT Users Mailing list > > > Cc: xCAT Users Mailing list > > > Subject: Re: [xcat-user] Monitoring with pcp > > > > > > > > > > > > Thanks for the details. > > > > > > Do you have DNS setup on the mn for the nodes? > > > > > > run host <nodename> > > > > > > Does it give correct ip address? > > > > > > Ling > > > > > > Ling Gao > > > Poughkeepsie Unix Development Lab > > > IBM Systems and Technology Group > > > Internal: T/L 293-5692 > > > External: ling...@us.ibm.com, 845-433-5692 > > > > > > "I never worry about the future. It comes soon enough." --- Albert > > > Einstein > > > > > > > > > > > > From: "Wiegers, Bert" <bert.wieg...@t-systems-sfr.com> > > > To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net> > > > Date: 08/30/2011 02:26 AM > > > Subject: Re: [xcat-user] Monitoring with pcp > > > > > > ________________________________ > > > > > > > > > > > > > > > Hi ling, > > > > > > > > > It is there and running. > > > > > > Starting it manually gives: > > > > > > # /opt/xcat/sbin/pcp_collect > > > Use of uninitialized value $hostname in substitution (s///) at > > > /opt/xcat/lib/perl/xCAT/NetworkUtils.pm line 154. > > > Use of uninitialized value $hostname in substitution (s///) at > > > /opt/xcat/lib/perl/xCAT/NetworkUtils.pm line 154. > > > Use of uninitialized value $hostname in substitution (s///) at > > > /opt/xcat/lib/perl/xCAT/NetworkUtils.pm line 154. > > > Use of uninitialized value $hostname in substitution (s///) at > > > /opt/xcat/lib/perl/xCAT/NetworkUtils.pm line 154. > > > config file is in /opt/xcat/lib/perl/xCAT_monitoring/pcp/pcpmon.config > > > config file is in /opt/xcat/lib/perl/xCAT_monitoring/pcp/pcpmon.config > > > config file is in /opt/xcat/lib/perl/xCAT_monitoring/pcp/pcpmon.config > > > config file is in /opt/xcat/lib/perl/xCAT_monitoring/pcp/pcpmon.config > > > config file is in /opt/xcat/lib/perl/xCAT_monitoring/pcp/pcpmon.config > > > config file is in /opt/xcat/lib/perl/xCAT_monitoring/pcp/pcpmon.config > > > config file is in /opt/xcat/lib/perl/xCAT_monitoring/pcp/pcpmon.config > > > config file is in /opt/xcat/lib/perl/xCAT_monitoring/pcp/pcpmon.config > > > config file is in /opt/xcat/lib/perl/xCAT_monitoring/pcp/pcpmon.config > > > : > > > : > > > : > > > > > > The first lines I do see frequently using xcat-commands. > > > /opt/xcat/lib/perl/xCAT/NetworkUtils.pm > > > 153: my $hostname = gethostbyaddr(inet_aton($iporhost), > > > AF_INET); > > > 154: $hostname =~ s/\..*//; #short hostname > > > > > > Bert > > > > > > From: Ling Gao [mailto:ling...@us.ibm.com <mailto:ling...@us.ibm.com> > > <mailto:ling...@us.ibm.com <mailto:ling...@us.ibm.com> > ] > > > Sent: Monday, August 29, 2011 11:00 PM > > > To: xCAT Users Mailing list > > > Cc: xCAT Users Mailing list > > > Subject: Re: [xcat-user] Monitoring with pcp > > > > > > Hi Bert, > > > Does the cluster have service node involved? After you run monstart, > > > the cronjob > > > /opt/xcat/sbin/pcp_collect is supposed to be run on the mn and the sn. > > > Please check if there are cron jobs running on the mn and the sn? If > > > there is no service node, > > then just > > > check on the mn. > > > crontab -l > > > What does it return? > > > > > > You can also run /opt/xcat/sbin/pcp_collect manually, (you can uncomment > > > some of the print > > > statement), to see what might be wrong. > > > > > > Ling > > > > > > Ling Gao > > > Poughkeepsie Unix Development Lab > > > IBM Systems and Technology Group > > > Internal: T/L 293-5692 > > > External: ling...@us.ibm.com, 845-433-5692 > > > > > > "I never worry about the future. It comes soon enough." --- Albert > > > Einstein > > > > > > > > > > > > From: "Wiegers, Bert" <bert.wieg...@t-systems-sfr.com> > > > To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net> > > > Date: 08/29/2011 02:22 AM > > > Subject: Re: [xcat-user] Monitoring with pcp > > > ________________________________________ > > > > > > > > > > > > Hello Ling, > > > > > > It is the standard entry: > > > > > > # cat pcpmon.config > > > mem.physmem > > > mem.util.free > > > mem.util.swapFree > > > filesys.used > > > proc.memory.size > > > disk.dev.total > > > > > > We are running: > > > # xdsh -V > > > Version 2.5.1 (svn r8304, built Thu Dec 2 14:31:00 EST 2010) > > > > > > I tried the rcm as well with the same effect. > > > > > > Bert > > > > > > > > > From: Ling Gao [mailto:ling...@us.ibm.com <mailto:ling...@us.ibm.com> > > <mailto:ling...@us.ibm.com <mailto:ling...@us.ibm.com> > ] > > > Sent: Monday, August 29, 2011 2:16 AM > > > To: xCAT Users Mailing list > > > Cc: xcat-user@lists.sourceforge.net > > > Subject: Re: [xcat-user] Monitoring with pcp > > > > > > What is the file $::XCATROOT/lib/perl/xCAT_monitoring/pcp/pcpmon.config > > > looks like? > > > > > > What version of xCAT are you using? (xdsh -V) > > > > > > Ling > > > > > > Ling Gao > > > Poughkeepsie Unix Development Lab > > > IBM Systems and Technology Group > > > Internal: T/L 293-5692 > > > External: ling...@us.ibm.com, 845-433-5692 > > > > > > "I never worry about the future. It comes soon enough." --- Albert > > > Einstein > > > > > > > > > > > > From: "Wiegers, Bert" <bert.wieg...@t-systems-sfr.com> > > > To: "xcat-user@lists.sourceforge.net" > > > <xcat-user@lists.sourceforge.net> > > > Date: 08/26/2011 07:22 PM > > > Subject: [xcat-user] Monitoring with pcp > > > ________________________________________ > > > > > > > > > > > > Hi, > > > I am trying to set up a monitoring with xcat and pcp. > > > > > > I got pcp-3.5.8-1 and installed it on the headnode and some computenodes. > > > nodetype is osi. > > > > > > monadd pcpmon > > > monstart pcpmon -r > > > ... > > > > > > # monls pcpmon > > > pcpmon monitored node-status-monitored > > > > > > tabdump monsetting is empty > > > tabdump performance is empty > > > monshow pcpmon nodeXY is empty > > > > > > > > > The daemons are running and I can query the remote machine with pminfo. > > > What am I missing? > > > > > > Best regards, > > > Bert > > > > > > ------------------------------------------------------------------------------ > > > EMC VNX: the world's simplest storage, starting under $10K > > > The only unified storage solution that offers unified management > > > Up to 160% more powerful than alternatives and 25% more efficient. > > > Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev > > > <http://p.sf.net/sfu/emc-vnx-dev2dev> > > <http://p.sf.net/sfu/emc-vnx-dev2dev <http://p.sf.net/sfu/emc-vnx-dev2dev> > > > > _______________________________________________ > > > xCAT-user mailing list > > > xCAT-user@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/xcat-user > <https://lists.sourceforge.net/lists/listinfo/xcat- > > user> > > <https://lists.sourceforge.net/lists/listinfo/xcat- > <https://lists.sourceforge.net/lists/listinfo/xcat-> > > > user> > > > > > > > > > ------------------------------------------------------------------------------ > > > EMC VNX: the world's simplest storage, starting under $10K > > > The only unified storage solution that offers unified management > > > Up to 160% more powerful than alternatives and 25% more efficient. > > > Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev > > > <http://p.sf.net/sfu/emc-vnx-dev2dev> > > <http://p.sf.net/sfu/emc-vnx-dev2dev <http://p.sf.net/sfu/emc-vnx-dev2dev> > > > > _______________________________________________ > > > xCAT-user mailing list > > > xCAT-user@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/xcat-user > <https://lists.sourceforge.net/lists/listinfo/xcat- > > user> > > <https://lists.sourceforge.net/lists/listinfo/xcat- > <https://lists.sourceforge.net/lists/listinfo/xcat-> > > > user> > > > > > > ------------------------------------------------------------------------------ > > > Special Offer -- Download ArcSight Logger for FREE! > > > Finally, a world-class log management solution at an even better > > > price-free! And you'll get a free "Love Thy Logs" t-shirt when you > > > download Logger. Secure your free ArcSight Logger TODAY! > > > http://p.sf.net/sfu/arcsisghtdev2dev > > > <http://p.sf.net/sfu/arcsisghtdev2dev> > > <http://p.sf.net/sfu/arcsisghtdev2dev > > <http://p.sf.net/sfu/arcsisghtdev2dev> > > > > _______________________________________________ > > > xCAT-user mailing list > > > xCAT-user@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/xcat-user > <https://lists.sourceforge.net/lists/listinfo/xcat- > > user> > > <https://lists.sourceforge.net/lists/listinfo/xcat- > <https://lists.sourceforge.net/lists/listinfo/xcat-> > > > user> > > > > [attachment "smime.p7s" deleted by Ling Gao/Poughkeepsie/IBM] > ------------------------------------------ > > ------------------------------------ > > Doing More with Less: The Next Generation Virtual Desktop > > What are the key obstacles that have prevented many mid-market businesses > > from deploying virtual desktops? How do next-generation virtual desktops > > provide companies an easier-to-deploy, easier-to-manage and more affordable > > virtual desktop > > > model.http://www.accelacomm.com/jaw/sfnl/114/51426474/______________________________ > > _________________ > > xCAT-user mailing list > > xCAT-user@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/xcat-user > <https://lists.sourceforge.net/lists/listinfo/xcat- > > user> > >
smime.p7s
Description: S/MIME cryptographic signature
------------------------------------------------------------------------------ Why Cloud-Based Security and Archiving Make Sense Osterman Research conducted this study that outlines how and why cloud computing security and archiving is rapidly being adopted across the IT space for its ease of implementation, lower cost, and increased reliability. Learn more. http://www.accelacomm.com/jaw/sfnl/114/51425301/
_______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user
