Re: [xcat-user] tftp open timeout

Thu, 16 Feb 2012 19:14:11 -0800

can you send ps axf output when the management node is under load? perhaps also top -b -n 1

Sent from Lotus Traveler

smithjohn --- Re: [xcat-user] tftp open timeout ---

From:"smithjohn" <[email protected]>
To[email protected]
Date:Thu, Feb 16, 2012 10:08 PM
SubjectRe: [xcat-user] tftp open timeout

ok, in my mail ,the last have a tips, I have 72 nodes in iDataplex rack, the node type is dx360 m4 with no disk,we use netboot to manager tested nodes
 
Date: Thu, 16 Feb 2012 21:52:58 -0500
From: [email protected]
To: [email protected]
Subject: Re: [xcat-user] tftp open timeout

Some additional detail is required.  How many nodes and what type of hardware?  'ps axf' output during an 'rpower on' attempt may be informative.

2012/2/16 smithjohn <[email protected]>
hi,Lissa:
       thanks  a lot that  you track my question zealously !
before I uninstall the Redhat6.2, I had solve the problem of DHCP get timeout.
that key of my table has error . In table of networks ,the nets join in a  wrong segment of ip address which I set .
so ,this problem had been solved.
but ,I am a new problem, we sitll use Redhat6.2 in managerment node,  when we use command  "rpower all on " to power on  all nodes,
the managerment node is running very very slowly. the cpu and memory of managerment node have not more space to run program.
 
tips: managerment node : redhat6.2
       tested node :redhat 6.2
       xcat release : 2.7
      node number :72
at last , thanks again

 
> To: [email protected]
> From: [email protected]
> Date: Thu, 16 Feb 2012 14:56:08 -0500

> Subject: Re: [xcat-user] tftp open timeout
>
> In that you will also have to uninstall Redhat 6.2, we can try and help
> you debug your problem. There have been successful installs of Redhat 6.2
> with 2.7. We will need a lot more information though. For a start,
> please tell us the following:
> What document did you follow to setup the Management Node?
> What kind of hardware do you have in your cluster?
>
>
> Lissa K. Valletta
> 2-3/T12
> Poughkeepsie, NY 12601
> (tie 293) 433-3102
>
>
>
>
>
> From: smithjohn <[email protected]>
> To: <[email protected]>
> Date: 02/15/2012 09:32 PM
> Subject: Re: [xcat-user] tftp open timeout
>
>
>
> thanks for your partic! ular respondence ! I will uninstall xcat of release
> 2.7, change other relase. And waiting for you test over ,I try it again!
>
> > To: [email protected]
> > From: [email protected]
> > Date: Wed, 15 Feb 2012 12:38:01 -0500
> > Subject: Re: [xcat-user] tftp open timeout
> >
> > We have not officially release support for Redhat 6.2. We are still in
> > test. Also we have not released xCAT 2.7, it is still in test. Even
> > when 2.7 goes out, Redhat 6.2 will still be experimental until later this
> > year, when we have had a chance to fully test it.
> > So what I am saying, you are running code that is still in test. It may
> > work or you may find problems in areas, we have not had a change to
> finish
> > testing.
> >
> > Liss! a K. Valletta
> > 2-3/T12
> > Poughkeepsie, NY 12601
> > (tie 293) 433-3102
> >
> >
> >
> >
> >
> > From: smithjohn <[email protected]>
> > To: <[email protected]>
> > Date: 02/15/2012 12:00 PM> Subject: Re: [xcat-user] tftp open timeout
> >
> >
> >
> > ok, thanks very much, you means the xcat 2.7 not support redhat 6.2, but
> I
> > still install ,and use it now,so,do you have anyother way to solve this
> > question. thanks again
> >
> > > To: 
------------------------------------------------------------------------------
Virtualization & Cloud Management Using Capacity Planning
Cloud computing makes use of virtualization - but cloud computing 
also focuses on allowing computing to be delivered as a service.
http://www.accelacomm.com/jaw/sfnl/114/51521223/
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user

Reply via email to